Scale - Hunter Genesis Programming And Operations Manual

This example means one minute and 30 seconds. If you enter 90 seconds while in this mode, the display shows
1:30S.
If you repeatedly press the AM/PM/? key, the mode toggles between hours:minutes and minutes:seconds. When
the mode indicator is correct, press ENTER to accept the data.
Exits the function and restores the time display.
Option #4 - Scale
With this option, you can scale (increase or decrease) the Run Time of any Program/start by a certain percentage.
Note: To increase the time, set the percentage at more than 100%.
To decrease the time, set the percentage at less than 100%.
For example, to increase watering time by 50%, enter 150%.
Select the Program/Start you want to change. Then, when you select option #4, the display shows:
Completes the setting of scaled Run Time. The display shows:
Note: The Run Times will show the new scaled times.
1:30S
Scale? <100%>
Press number keys for the percentage of Run Time you want.
Scaling 150%
GENESIS OPERATIONS MANUAL
23