Copy Runtimes; Minutes/Seconds - Hunter Genesis Programming And Operations Manual

Option #2 - Copy Run Times
With this option, you can copy Run Times within a Program from one Start to another. For example, in Program
#1 you can copy the Run Times already set for Start #1 to Start #2.
First, specify the Program/Start you want the Run Times copied to. Then, when you select option #2, the display
shows:
Begins the process of setting this option. The display changes to:
This example shows that you're in Program #1, and asks which Start to copy from.
Press number key(s) for the Start you want to copy Run Times from. The example in this display will
copy the Run Times from Start #1:
Sets the Program to copy the Run Times from Program #1, Start #1. This display shows:
Exits the function, restores the time display.
Option #3 - Hrs:Min or Min:Sec
This option changes the time setting mode for all stations in a Program/Start. The M mode (Hours: Minutes)
ranges from 1 minute to 4 hours:15 minutes, in one-minute increments. The S mode (Minutes: Seconds) ranges
from 1 second to 4 minutes:15 seconds, in one-second increments.
Select the Program/Start you want to change. Then, when you select option #3, the display shows:
This display indicates the current mode is hours and minutes. Run Time displays in this mode show a letter M:
This example means one hour and 30 minutes. If you enter 90 minutes for a Run Time while in this mode, the
display shows 1:30M.
Changes the mode to minutes and seconds:
Run Time displays in this mode show a letter S:
22

Copy RunTimes?

Copy from P1 T?
Copy from P1 T1_
Copied!
P1 T1 Minutes?
1:30M
P1 T1 Seconds?
GENESIS OPERATIONS MANUAL