Set Up A Program With Watering And Non-Watering Days In The Irrigation Schedule - Hunter Genesis Programming And Operations Manual

3. SET UP A PROGRAM WITH WATERING AND NON-WATERING
DAYS IN THE IRRIGATION SCHEDULE
Puts the controller in the proper mode for changing the Program setting.
The display shows:
The cursor is positioned under the Program number. If you press the PROGRAM key again, the number
advances. Continue to press the PROGRAM key until the number showing is the Program you want to change, or
press a number key from 1 to 5.
When you press WATER DAYS ON or WATER DAYS OFF once, the display shows the Program
number, the numbers indicating days in blocks of 7, and the first seven days of the schedule.
If the default Program is used, all the days are represented by Y for Yes in Program 1, and N for No in other
Programs. For example:
P5 means Program 5. The 1 means the first day in the current display is day #1 of the schedule, and the 7 means
the last day in the current display is day #7 of the schedule. The cursor is blinking on the first day of the block of 7
days shown.
Each time you press WATER DAYS YES, the letter Y shows at the cursor position and the cursor moves to the
next day. Each time you press WATER DAYS NO, the letter N shows at the cursor position and the cursor moves
to the next day. A display showing YNYNYNY, for example, indicates a watering schedule that operates every
other day.
You may also press AM/PM SELECT (AMPM?) to simply advance the cursor to the next day without changing the
setting.
If your schedule includes more than seven days, the display moves to the next set of seven days as soon as you
set day #7. The display shows:
Continue pressing WATER DAYS YES and WATER DAYS NO until days 8 through 14 are set, and so on. You
must set up all days in your schedule (32 maximum) with this function.
Press CALENDAR to advance through the schedule seven days at a time. Useful for reviewing or
moving to a specific block of days.
Accepts the schedule of watering days -- ON and OFF -- for the Program you specified and advances
the display to the first Start of the Program.
To exit programming, press the TIME key.
Exits the function, restores the time display.
Program. . . 1
P5 1-7 NNNNNNN
P5 8-14 NNNNNNN
GENESIS OPERATIONS MANUAL
11