Table of Contents
Advertisement
Innovative Scientific Solutions, Inc.
Once the LC-2 control box is secured, connect the power adapter to universal power (110-240
VAC). Plug the power adapter to the LC-2 control box in the receptacle labeled POWER. Seat
the plug so it is fully inserted in the power receptacle. Screw the locking connector clockwise
until tight. When mounting the control box, do not position it so that the power plug is
difficult to plug in or unplug.
Connect the Ethernet cable to the NIC of the control computer or local network switch.
Connect the other end of the Ethernet cable to the ETHERNET receptacle on the LC-2. The
green and orange lights on the Ethernet receptacle will flash once communication has been
established.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the LC-2 and is the answer not in the manual?
Questions and answers