Table of Contents
Advertisement
Innovative Scientific Solutions, Inc.
Restart LC will perform a software reset. This should be used to fix connection problems or if
the software becomes unresponsive.
Focus Init will find the limits again. This can be used if the lens limits need to be re-learned
for lenses will multiple focal range settings.
Exit will disconnect from the lens controller and exit the program.
Multi Control
The Lens Controller Interface allows for master control of multiple LC-2s connected over a local
network. This is only done through the ProAcquire Multi-camera add-on and is detailed in
the ProAcquire user manual.
Firmware Upgrade
Firmware can be upgraded over the Ethernet connection. When a firmware update is
available, download from the ISSI website (www.psp-tsp.com/canon) and save. The firmware
update tool can be found in the 'About' menu. Firmware updates will be issued if needed
and will always be posted to the ISSI website under the ISSI products page in the download
section for the LC-2. Always use the software version recommended for the firmware.
Click on Firmware Update to open the window to select the firmware file to upload.
16
Advertisement
Table of Contents
Need help?
Do you have a question about the LC-2 and is the answer not in the manual?