Chipset Configuration; North Bridge - Supermicro SuperServer 2029TP-HC0R User Manual

SuperServer 2029TP-HTR/HC1R/HC0R User's Manual
Enhanced Halt State (C1E)
Select Enable to enable "Enhanced Halt State" support, which will significantly reduce the
CPU's power consumption by minimizing CPU's clock cycles and reduce voltage during a
"Halt State." The options are Disable and Enable.
Package C State Control

Package C State
Use this feature to set the limit on the C-State package register. The options are C0/1 state,
C2 state, C6 (non-Retention) state, C6 (Retention) state, No Limit, and Auto.
CPU T State Control

Software Controlled T-States
If this feature is set to Enable, CPU throttling settings will be supported by the software of
the system. The options are Disable and Enable.
Chipset Configuration
Warning: Setting the wrong values in the following sections may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to configure the settings for the Intel North Bridge.
UPI (Ultra Path Interconnect) Configuration

This section displays the following UPI General Configuration information:
•
Number of CPU
•
Number of IIO
•
Current UPI Link Speed
•
Current UPI Link Frequency
•
UPI Global MMIO Low Base/Limit
•
UPI Global MMIO High Base/Limit
78