Supermicro Supero SUPERSERVER 2027PR-DTR User Manual

page of 144

/ 144
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

UPER

SUPERSERVER

2027PR-DTR

2027PR-DTFR

2027PR-DTTR

USER'S MANUAL

Revision 1.0

Table of Contents

Summary of Contents for Supermicro Supero SUPERSERVER 2027PR-DTR

Page 1 UPER ® SUPERSERVER 2027PR-DTR 2027PR-DTFR 2027PR-DTTR USER'S MANUAL Revision 1.0...
Page 2 This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
Page 3 Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 2027PR-DTR/DTFR/DTTR. Installation and maintainance should be performed by experienced technicians only. The SuperServer 2027PR-DTR/DTFR/DTTR is a high-end server based on the SC217HD+-R1K28B 2U rackmount chassis and the X9DRT-P/PIBF/PT dual processor serverboards.
Page 4 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 2027PR-DTR/DTFR/DTTR. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X9DRT-P/PIBF/PT serverboard, including the locations and functions of connections, headers and jumpers.
Page 5 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes...
Page 6: Table Of Contents
Mounting Rails ....................1-5 Advanced Power Management ............... 1-5 Intel® Intelligent Power Node Manager (IPNM) ..........1-5 Manageability Engine (ME) ................1-5 Contacting Supermicro ..................1-7 2U Twin: System Notes ................... 1-8 Nodes ......................1-8 System Power ....................1-8 SATA Backplane/Drives ................... 1-8 Chapter 2 Server Installation Overview ......................
Page 7 Table of Contents Rack Mounting Considerations ............... 2-3 Ambient Operating Temperature ..............2-3 Reduced Airﬂ ow ..................2-3 Mechanical Loading ................... 2-3 Circuit Overloading ..................2-3 Reliable Ground ..................2-4 Installing the System into a Rack ..............2-4 Identifying the Sections of the Rack Rails ............2-4 Locking Tabs ....................
Page 8 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Chapter 5 Advanced Serverboard Setup Handling the Serverboard ................5-1 Precautions ..................... 5-1 Unpacking ....................... 5-1 Connecting Cables ..................5-2 Connecting Data Cables ................. 5-2 Rear I/O Ports ....................5-2 Processor and Heatsink Installation..............5-3 Installing a Passive CPU Heatsink ..............5-6 Removing the Heatsink ...................
Page 9 Table of Contents Installing the Serverboard ................6-10 Compatible Motherboards ................6-10 Permanent and Optional Standoffs ............... 6-10 Installing an Daughter Card ................6-12 6-10 Adding an Expansion Card ................6-13 6-11 Drive Bay Installation/Removal ..............6-14 Accessing the Drive Bays ................6-14 6-12 Power Supply ....................
Page 10 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes...
Page 11: Chapter 1 Introduction
One (1) rails set (MCP-290-00053-0N) Note: For your system to work properly, please follow the links below to download all necessary drivers/utilities and the user’s manual for your server. • Supermicro product manuals: http://www.supermicro.com/support/manuals/ • Product drivers and utilities: ftp://ftp.supermicro.com •...
Page 12: Serverboard Features
(Socket R LGA 2011). Please refer to the serverboard description pages on our web site for a complete listing of supported processors (www.supermicro. com). Each processor supports two full-width Intel QuickPath Interconnect (QPI) links with a Data Transfer Rate of up to 8 GT/s per QPI.
Page 13: Pci Expansion Slots
Chapter 1: Introduction PCI Expansion Slots The X9DRT-P/PIBF/PT serverboard has for each node the following expansion card slots available for use with a riser card (not all slots are accessible through the chassis): • One (1) PCI-E 3.0 x16 Slot (CPU1 Slot1) •...
Page 14: Server Chassis Features
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Server Chassis Features The following is a general outline of the main features of the SC217 server chassis. System Power Each SC217 chassis model includes a high-efﬁ ciency 94%+% Platinum certiﬁ ed power supply, rated at 1280 Watts plus one redundant backup power supply. In the unlikely event your power supply fails, replacement is simple and can be accomplished without tools.
Page 15: Air Shrouds
Chapter 1: Introduction Air Shrouds The SC217 chassis includes two Mylar air shrouds that direct the airﬂ ow where cooling is needed on each serverboard. Always use the air shroud included with your chassis on each serverboard. Mounting Rails The SC217 includes a set of quick-release rails, and can be placed in a rack for secure storage and use.
Page 16 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Figure 1-1. C602 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. Gen3 x16 PE3 PE2 PE1 DMI CPU FRONT FAN Side Socket 1 SANDYBRIDGE CPU REAR (I/O Side) Socket 0 SANDYBRIDGE PE3 PE2 PE1 DMI...
Page 17: Contacting Supermicro
Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Wesite: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML...
Page 18: Twin: System Notes
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL 2U Twin: System Notes As a 2U Twin conﬁ guration, the 2027PR-DTR/DTFR/DTTR is a unique server system. With two system boards incorporated into a single chassis acting as two separate nodes, there are several points you should keep in mind. Nodes Each of the two serverboards act as a separate node in the system.
Page 19: Chapter 2 Server Installation
Chapter 2: Server Installation Chapter 2 Server Installation Overview This chapter provides a quick setup checklist to get your SuperServer 2027PR-DTR/DTFR/DTTR up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time.
Page 20: Choosing A Setup Location
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Choosing a Setup Location • Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches) and approximately 30 inches of clearance in the back of the rack to allow for sufﬁ cient airﬂ ow and ease in servicing. •...
Page 21: Rack Mounting Considerations
Chapter 2: Server Installation Rack Mounting Considerations Warning! To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: •...
Page 22: Reliable Ground
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Reliable Ground A reliable ground must be maintained at all times. To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e. the use of power strips, etc.).
Page 23 Chapter 2: Server Installation Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rails (Left Rail Assembly Shown) Rail Assembly (Shown with Rails Retracted) Outer Rail Middle Rail Locking Tab Inner Rail This Side Faces Outward...
Page 24: Locking Tabs
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Locking Tabs Each inner rail has a locking tab. This tab locks the chassis into place when installed and pushed fully into the rack. These tabs also lock the chassis in place when fully extended from the rack. This prevents the server from coming completely out of the rack when when the chassis is pulled out for servicing.
Page 25: Installing The Inner Rails On The Chassis
Chapter 2: Server Installation Installing The Inner Rails on the Chassis To install the inner rails, use the procedure below. Installing the Inner Rails (Figures 2-3 and 2-4) 1. Conﬁ rm that the left and right inner rails have been correctly identiﬁ ed. 2.
Page 26: Installing The Outer Rails On The Rack
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Installing the Outer Rails on the Rack Use the procedure below to install the outer rails onto the rack. Installing the Outer Rails (Figure 2-5) 1. Press upward on the locking tab at the rear end of the middle rail. 2.
Page 27: Standard Chassis Installation
Chapter 2: Server Installation Standard Chassis Installation Installing the Chassis into a Rack (Figure 2-6) 1. Conﬁ rm that the inner rails are properly installed on the chassis. 2. Conﬁ rm that the outer rails are correctly installed on the rack. 3.
Page 28: Checking The Serverboard Setup
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Checking the Serverboard Setup After you install the 2027PR-DTR/DTFR/DTTR server in the rack, you will need to open the unit to make sure the serverboard is properly installed and all the connections have been made. Before operating the SC217 chassis for the ﬁ rst time, it is important to remove the protective ﬁ...
Page 29 Chapter 2: Server Installation Checking the Components and Setup 1. You may have one or two processors already installed into the serverboard. Each processor needs its own heat sink. See Chapter 5 for instructions on processor and heat sink installation. 2.
Page 30: Checking The Drive Bay Setup
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Checking the Drive Bay Setup Next, you should check to make sure the peripheral drives and the SATA drives have been properly installed and all connections have been made. Checking the Drives 1. All drives are accessable from the front of the server. A hard drive can be installed and removed from the front of the chassis without removing the top chassis cover.
Page 31: Chapter 3 System Interface
Chapter 3: System Interface Chapter 3 System Interface Overview There are several LEDs on the control panel and on the drive carriers to keep you constantly informed of the overall status of the system. SC217 models include four front panels on the handles of the chassis which control each of the systems. This chapter explains the meanings of all LED indicators and the appropriate response you may need to take.
Page 32: Control Panel Buttons
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Control Panel Buttons Power The main power button on each of the control panels is used to apply or remove power from the power supply to associated node Turning power to the system off with this button removes the main power, but keeps standby power supplied to the system.
Page 33: Information Led
Chapter 3: System Interface Information LED See the following table for the status shown by this LED. Information LED Status Description Continously on and red An overheat ocondition has occured. (This may be caused by cable congestion.) Blinking red (1 Hz) Fan failure: check for an inoperative fan.
Page 34 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes...
Page 35: Chapter 4 Standardized Warning Statements For Ac Systems
Only certiﬁ ed technicians should attempt to install or conﬁ gure components. Read this appendix in its entirety before installing or conﬁ guring components in the Supermicro chassis. These warnings may also be found on our web site at http://www.supermicro.com/ about/policies/safety_information.cfm. Warning Deﬁ nition Warning! This warning symbol means danger.
Page 36 SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie beﬁ nden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.
Page 37 Warning Statements for AC Systems ‫ﺟﺴﺪﻳﺔ‬ ‫ﺍﺻﺎﺑﺔ‬ ‫ﺗﺘﺴﺒﺐ ﻓﻲ‬ ‫ﺣﺎﻟﺔ ﻳﻤﻜﻦ ﺃﻥ‬ ‫ﺍﻧﻚ ﻓﻲ‬ ‫ﺧﻄﺮ‬ ‫ﻳﻌﻨﻲ‬ ‫ﻫﺬﺍ ﺍﻟﺮﻣﺰ‬ !‫ﺗﺤﺬﻳﺮ‬ ‫ﺍﻟﺪﻭﺍﺋﺮ‬ ‫ﺑﺎﻟﻤﺨﺎﻁﺮ ﺍﻟﻨﺎﺟﻤﺔ ﻋﻦ‬ ‫ﻦ ﻋﻠﻰ ﻋﻠﻢ‬ ، ‫ﻛ‬ ‫ﻣﻌﺪﺍﺕ‬ ‫ﺗﻌﻤﻞ ﻋﻠﻰ ﺃﻱ‬ ‫ﻗﺒﻞ ﺃﻥ‬ ‫ﺍﻟﻜﻬﺮﺑﺎﺋﻴﺔ‬ ‫ﺣﻮﺍﺩﺙ‬ ‫ﺃﻱ‬ ‫ﻭﻗﻮﻉ‬ ‫ﻤﻨﻊ‬ ‫ﻟ‬ ‫ﺍﻟﻮﻗﺎﺋﻴﺔ‬...
Page 38: Installation Instructions
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Installation Instructions Warning! Read the installation instructions before connecting the system to the power source. 設置手順書システムを電源に接続する前に、設置手順書をお読み下さい。警告将此系统连接电源前,请先阅读安装说明。警告將系統與電源連接前，請先閱讀安裝說明。 Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.
Page 39: Circuit Breaker
Chapter 4: Warning Statements for AC Systems Circuit Breaker Warning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V, 20 A. サーキット・ブレーカーこの製品は、短絡（過電流）保護装置がある建物での設置を前提としています。保護装置の定格が250 V、...
Page 40: Power Disconnection Warning
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual ‫ﻓﻲ‬ ‫ﺍﻟﺘﻲ ﺗﻢ ﺗﺜﺒﻴﺘﻬﺎ‬ ‫ﻣﻦ ﺍﻟﺪﻭﺍﺋﺮﺍﻟﻘﺼﻴﺮﺓ‬ ‫ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﻣﻌﺪﺍﺕ‬ ‫ﻳﻌﺘﻤﺪ ﻋﻠﻰ‬ ‫ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ‬ ‫ﺍﻟﻤﺒﻨﻰ‬ ‫ﺃﻛﺜﺮ ﻣﻦ‬ ‫ﻟﻴﺲ‬ ‫ﻮﻗﺎﺋﻲ‬ ‫ﺍﻟ‬ ‫ﺍﻟﺠﻬﺎﺯ‬ ‫ﺗﻘﻴﻴﻢ‬ ‫ﺃﻥ‬ ‫ﺗﺄﻛﺪ ﻣﻦ‬ 20A, 250V 경고! 이 제품은 전원의 단락(과전류)방지에 대해서 전적으로 건물의 관련 설비에 의존합니다.
Page 41 Chapter 4: Warning Statements for AC Systems Warnung Das System muss von allen Quellen der Energie und vom Netzanschlusskabel getrennt sein, das von den Spg.Versorgungsteilmodulen entfernt wird, bevor es auf den Chassisinnenraum zurückgreift, um Systemsbestandteile anzubringen oder zu entfernen. ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema.
Page 42: Equipment Installation
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Equipment Installation Warning! Only trained and qualiﬁ ed personnel should be allowed to install, replace, or service this equipment. 機器の設置トレーニングを受け認定された人だけがこの装置の設置、交換、またはサービスを許可されています。警告只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。警告只有經過受訓且具資格人員才可安裝、更換與維修此設備。 Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualiﬁ...
Page 43: Restricted Area
Chapter 4: Warning Statements for AC Systems Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door geschoold en gekwaliﬁ ceerd personeel. Restricted Area Warning! This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.
Page 44: Battery Handling
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual ‫אזור עם גישה מוגבלת‬ !‫אזהרה‬ ‫יש להתקין את היחידה באזורים שיש בהם הגבלת גישה. הגישה ניתנת בעזרת‬ .('‫כלי אבטחה בלבד )מפתח, מנעול וכד‬ ‫ﻣﺤﻈﻮﺭﺓ‬ ‫ﻣﻨﺎﻁﻖ‬ ‫ﻟﺘﺮﻛﻴﺒﻬﺎ ﻓﻲ‬ ‫ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ‬ ‫ﺗﺨﺼﻴﺺ‬ ‫ﺗﻢ‬ ،‫ﺃﺩﺍﺓ ﺧﺎﺻﺔ‬ ‫ﻣﻦ ﺧﻼﻝ ﺍﺳﺘﺨﺪﺍﻡ‬ ‫ﻓﻘﻂ‬...
Page 45 Chapter 4: Warning Statements for AC Systems Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant.
Page 46: Redundant Power Supplies
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Redundant Power Supplies Warning! This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. 冗長電源装置このユニットは複数の電源装置が接続されている場合があります。ユニットの電源を切るためには、すべての接続を取り外さなければなりません。警告此部件连接的电源可能不止一个，必须将所有电源断开才能停止给该部件供电。警告此裝置連接的電源可能不只一個，必須切斷所有電源才能停止對該裝置的供電。 Warnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle Verbindungen entfernt werden.
Page 47: Backplane Voltage
Chapter 4: Warning Statements for AC Systems ‫ﺍﻣﺪﺍﺩ ﺍﻟﻄﺎﻗﺔ‬ ‫ﺑﻮﺣﺪﺍﺕ‬ ‫ﻋﺪﺓ ﺍﺗﺼﺎﻻﺕ‬ ‫ﺠﻬﺎﺯ‬ ‫ﺍﻟ‬ ‫ﻳﻜﻮﻥ ﻟﻬﺬﺍ‬ ‫ﻗﺪ‬ ‫ﺍﻟﻜﻬﺮﺑﺎء‬ ‫ﻋﻦ‬ ‫ﻮﺣﺪﺓ‬ ‫ﺍﻟ‬ ‫ﻟﻌﺰﻝ‬ ‫ﻛﺎﻓﺔ ﺍﻻﺗﺼﺎﻻﺕ‬ ‫ﻳﺠﺐ ﺇﺯﺍﻟﺔ‬ 경고! 이 장치에는 한 개 이상의 전원 공급 단자가 연결되어 있을 수 있습니다. 이 장치에 전원을...
Page 48: Comply With Local And National Electrical Codes
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Attention Lorsque le système est en fonctionnement, des tensions électriques circulent sur le fond de panier. Prendre des précautions lors de la maintenance. ‫מתח בפנל האחורי‬ !‫הרה‬ ‫אז‬ ‫קיימת סכנת מתח בפנל האחורי בזמן תפעול המערכת. יש להיזהר במהלך‬ .‫העבודה‬...
Page 49: Product Disposal
Chapter 4: Warning Statements for AC Systems ¡Advertencia! La instalacion del equipo debe cumplir con las normas de electricidad locales y nacionales.Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ ‫הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫התקנת‬...
Page 50: Hot Swap Fan Warning
SUPERSERVER 2027PR-DTR/DTFR/DTTR Series User's Manual Warnung Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement.
Page 51 Chapter 4: Warning Statements for AC Systems 当您从机架移除风扇装置，风扇可能仍在转动。小心不要将手指、螺丝起子和其他物品太靠近风扇警告當您從機架移除風扇裝置，風扇可能仍在轉動。小心不要將手指、螺絲起子和其他物品太靠近風扇。 Warnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ventilador del chasis.
Page 52: Power Cable And Ac Adapter
ﬁ re. Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certiﬁ ed cables (that have UL/CSA shown on the code) for any other electrical devices than products designated by Supermicro only. 電源コードとACアダプター...
Page 53 Appareils électroménagers et de loi sur la sécurité Matériel interdit l'utilisation de UL ou CSA câbles certiﬁ és qui ont UL ou CSA indiqué sur le code pour tous les autres appareils électriques que les produits désignés par Supermicro seulement.
Page 54 Elektrisch apparaat en veiligheidsinformatiebladen wet verbiedt het gebruik van UL of CSA gecertiﬁ ceerde kabels die UL of CSA die op de code voor andere elektrische apparaten dan de producten die door Supermicro alleen.
Page 55: Chapter 5 Advanced Serverboard Setup
Chapter 5: Advanced Serverboard Setup Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to install the X9DRT-P/PIBF/PT motherboard into the chassis, connect the data and power cables and install add-on cards. All motherboard jumpers and connections are also described. A layout and quick reference chart are included in this chapter for your reference.
Page 56: Connecting Cables
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Connecting Cables Now that the processors are installed, the next step is to connect the cables to the serverboard. Connecting Data Cables The cables used to transfer data from the peripheral devices have been carefully routed in preconﬁ gured systems to prevent them from blocking the ﬂ ow of cooling air that moves through the system from front to back.
Page 57: Processor And Heatsink Installation
• Install the processor into the CPU socket before installing the heatsink. • Refer to the Supermicro web site for updates on CPU support. Installing a CPU 1. There are two levers on the LGA 2011 socket. First press and release the load lever labeled "Open 1st".
Page 58 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL 3. With the second lever fully Open the load retracted, gently push down on plate. the "Open 1st" lever to loosen the load plate. Lift the load plate with your ﬁ ngers to open it completely. 4.
Page 59 Chapter 5: Advanced Serverboard Setup 7. With the "Close 1st" lever fully Gently close the retracted, gently close the load load plate. plate. Push down and lock the lever labeled "Close 1st". 8. Make sure the locking mechanism on the "Close 1st" lever catches the lip of the load plate.
Page 60: Installing A Passive Cpu Heatsink
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Installing a Passive CPU Heatsink 1. Do not apply any thermal grease to the heatsink or the CPU die -- the required amount has already been applied. 2. Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the Serverboard's and the Heatsink Bracket underneath.
Page 61: Removing The Heatsink
Chapter 5: Advanced Serverboard Setup Removing the Heatsink Caution: We DO NOT recommend that the CPU or the heatsink be removed. However, if you do need to uninstall the heatsink, please follow the instructions below to uninstall the heatsink to prevent damage done to the CPU or the CPU socket. 1.
Page 62: Installing Memory
Populating two slots at a time with memory modules of the same size and type will result in interleaved (128-bit) memory, which is faster than non-interleaved (64-bit) memory. Note: Check the Supermicro website (www.supermicro.com) for the latest memory support information.
Page 63: Maximum Memory
Chapter 5: Advanced Serverboard Setup Maximum Memory The X9DRT-P/PIBF/PT serverboard supports up to 1 TB of ECC RDIMM memory in sixteen (16) DIMM slots. Figure 5-2. Installing DIMM into Slot To Install: Insert Notch Notch module vertically and press down until it snaps into place.
Page 64 1066, 1066, 1066 1066, 1333, 1333, 1333, 1333, 1333, 1600 1600, 1600, 1600 1600 1866 1866 Note: For detailed information on memory support and updates, please refer to the SMC Recommended Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm. 5-10...
Page 65 1333 1333 QRx8 16GB 800, 1066, 800, 1066, 800, 800, 1333 1333 1333 1333 1333 1333 Note: For detailed information on memory support and updates, please refer to the SMC Recommended Memory List posted on our website at http://www.supermicro.com/support/resources/mem.cfm. 5-11...
Page 66: Adding Pci Expansion Cards
1333 1600 1600 Note: For detailed information on memory support and updates, please refer to the SMC Recommended Memory List posted on our website at http://www.supermicro. com/support/resources/mem.cfm. Other Important Notes and Restrictions • For the memory modules to work properly, please install DIMM modules of the same type, same speed and same operating frequency on the motherboard.
Page 67: Serverboard Details
Chapter 5: Advanced Serverboard Setup Serverboard Details Figure 5-3. X9DRT-P/PIBF/PT Serverboard Layout (not drawn to scale) USB0/1 FAN4 JPME1 IPMI JPME2 JLAN1 JI2C2 JI2C1 CTRL JIB1 CTRL X9DRT-P/-PT/-PIBQ/-PIBF Rev. 1.00 XDP-CPU JSD1 JBT1 I-SATA0 JBAT1 SXB1 CPU1 CLOSE 1st OPEN 1st SXB2 CPU2 CLOSE 1st...
Page 68 6. Changing BMC log-in information is recommended upon system bootup. The default username is ADMIN and password is ADMIN. For BMC best practices, please refer to: http://www.supermicro.com/products/nfo/ﬁ les/IPMI/ Best_Practices_BMC_Security.pdf. X9DRT-P/PIBF/PT Quick Reference Jumper...
Page 69 Chapter 5: Advanced Serverboard Setup Connector Description Inﬁ niBand Connector supported by the Mellano Connect-X3QDR/FDRIB chip (for X9DRT-PIBF Only) JBAT1 Onboard Battery SMC Proprietary Add-On Card for Power, FP Control & SATA Connections JIPMB1 4-pin External BMC I C Header (for an IPMI Card) JLAN1 1_ Gigabit Ethernet LAN Port supported by the Intel i350 chip (for X9DRT-P/PIBQ/ PIBF)
Page 70: Connector Defi Nitions
SATA connections. The BPN-ADP-8SATA3P adapter card is supported by this motherboard. These adapter cards are designed speciﬁ cally for use with Supermicro's server chassis. For your system to work properly, be sure to have an appropriate adapter card installed in JF2 on your motherboard.
Page 71 Chapter 5: Advanced Serverboard Setup LAN1 (Ethernet Ports) LAN Ports (LAN1) Pin Deﬁ nitions A LAN (Ethernet) Port 1 is located Pin# Deﬁ nition Pin# Deﬁ nition at JLAN1 on the I/O backplane P2V5SB SGND on the motherboard. This LAN port supports Gigabit_LAN on the TD0+ Act LED...
Page 72 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Inﬁ niBand Connection Inﬁ niBand (IB) Pin Deﬁ nitions The onboard Inﬁ niBand (IB) connector Pin# Deﬁ nition Pin# Deﬁ nition is located on the backplane only on Ground Transmitter the X9DRT-PIBF motherboard. The Inverted Data IB switch is primarily used for high- Input performance computing.
Page 73 Chapter 5: Advanced Serverboard Setup Trusted Platform Module Header TPM/Port 80 Header (JTPM1) Pin Deﬁ nitions The JTPM1 header is used to connect Pin# Deﬁ nition Pin# Deﬁ nition a Trusted Platform Module (TPM), LCLK available separately from a third-party vendor.
Page 74: Jumper Settings
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Jumper Settings Connector Pins Explanation of Jumpers To modify the operation of the Jumper motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two Setting pins to change the function of the connector.
Page 75 Chapter 5: Advanced Serverboard Setup GLAN Enable/Disable GLAN Enable (JPL1) Jumper Settings JPL1 enables or disables the LAN Jumper Setting Deﬁ nition Port 1 (JPLAN1) on the motherboard. Pins 1-2 Enabled (default) See the table on the right for jumper set tings.
Page 76 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Management Engine (ME) ME Recovery (JPME1) Recovery Jumper Settings Jumper Setting Deﬁ nition Use Jumper JPME1 to select ME Pins 1-2 Normal (Default) Firmware Recovery mode, which will limit resource allocation for essential Pins 2-3 ME Recovery system operation only in order to maintain normal power operation and management.
Page 77: 5-10 Onboard Indicators
Chapter 5: Advanced Serverboard Setup 5-10 Onboard Indicators LAN LEDs GLAN LED Link Speed Activity The Ethernet LAN port is located on the IO Backplane on the motherboard. Each LAN port has two LEDs. The LAN Link Indicator Yellow LED indicates activity. The LED Settings Link LED on the left side of the LAN LED Color...
Page 78 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL HDD/SATA LED (LE3) HDD/SATA LED (LE3) Settings An HDD/SATA LED Indicator is located Status Deﬁ nition at LE3 on the motherboard. This LED HDD/SATA Connected indicates the status of hard drive activities or SATA activities. Also see No connection the layout below for the LED locations.
Page 79: 5-11 Pci-Express And Serial Ata Connections
Paral- lel ATA. For more information on SATA HostRAID conﬁ guration, please refer Ground to the Intel SATA HostRAID User's Guide posted on our Website @ http:// www.supermicro.com. See the table on the right for pin deﬁ nitions. Ground 5-25...
Page 80: 5-12 Installing Software
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL 5-12 Installing Software The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com. Some of these must be installed, such as the chipset driver. After accessing the ftp site, go into the CDR_Images directory and locate the ISO ﬁ...
Page 81: Superdoctor 5
Chapter 5: Advanced Serverboard Setup SuperDoctor 5 ® The Supermicro SuperDoctor 5 is a hardware and operating system services monitoring program that functions in a command-line or web-based interface in Windows and Linux operating systems. The program monitors system health...
Page 82 Figure 5-8. SuperDoctor 5 Interface Display Screen (Remote Control) Note: The SuperDoctor 5 program and User’s Manual can be downloaded from the Supermicro web site at http://www.supermicro.com/products/nfo/sms_sd5.cfm. For Linux, we recommend that you use the SuperDoctor II application instead. 5-28...
Page 83: 5-13 Serverboard Battery
Chapter 5: Advanced Serverboard Setup 5-13 Serverboard Battery Caution: There is a danger of explosion if the onboard battery is installed upside down, which will reverse its polarites (see Figure 5-9). This battery must be replaced only with the same or an equivalent type recommended by the manufacturer (CR2032).
Page 84 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes 5-30...
Page 85: Chapter 6 Advanced Chassis Setup
Chapter 6: Advanced Chassis Setup Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform maintenance on the SC217HD+-R1K28B chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary, skip ahead to the step that follows.
Page 86: Removing The Power Cord
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Figure 6-1. Front and Rear Chassis Views Control Panel Control Panel SATA Drives (24) 1G (2027PR-DTR & 2027PR-DTFR) or 10G (2027PR-DTTR) IPMI LAN Port USB Ports Ethernet Ports VGA Port PCI-E Slots (2) Power Supplies (2) Inﬁ...
Page 87: Chassis Cover
Chapter 6: Advanced Chassis Setup Chassis Cover Before operating the SC217 chassis for the ﬁ rst time, it is important to remove the protective ﬁ lm covering the top of the chassis, in order to allow for proper ventilation and cooling. Removing the Chassis Cover and Protective Film (Figure 6-2) 1.
Page 88: Air Shrouds
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Air Shrouds Air shrouds concentrate airﬂ ow to maximize fan efﬁ ciency. The SC217 chassis requires air shrouds for each motherboard node. Air shrouds vary depending upon the motherboard used. See the illustrations below. Installing an Air Shroud (Figure 6-3) 1.
Page 89: Checking The Airfl Ow
Chapter 6: Advanced Chassis Setup Checking the Airﬂ ow Checking Airﬂ ow 1. Make sure there are no objects obstructing the airﬂ ow in and out of the chassis. In addition, if you are using a front bezel, make sure the bezel's ﬁ lter is replaced periodically.
Page 90 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Changing a System Fan 1. If necessary, open the chassis while the system is running to determine which fan has failed. Never run the server for an extended period of time with the chassis cover open. 2.
Page 91: Removing And Installing The Backplane
Chapter 6: Advanced Chassis Setup Removing and Installing the Backplane The SC217 chassis backplane is located behind the hard drives and in front of the front system fans. Although backplane failure rarely occurs, in the event of a backplane failure, follow the instructions below. Removing the Backplane Removing the Backplane from the Chassis 1.
Page 92 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL 7. Loosen the three screws in the spring bar, located on the ﬂ oor of the chassis, indicated by the arrows below (Figure 6-7). Figure 6-7. Loosening the Spring Bar Screws in the Floor of the Chassis 8.
Page 93: Installing The Backplane
Chapter 6: Advanced Chassis Setup Installing the Backplane Installing the Backplane into the Chassis (Figure 6-9) 1. Ensure that all of the hard drive carriers have been removed from the bays in the front of the chassis and that the spring bar has been loosened as directed in the previous section.
Page 94: Installing The Serverboard
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Installing the Serverboard Compatible Motherboards Most Supermicro cableless Twin series motherboards are compatible with the SC217 chassis. For the most up-to-date information on compatible motherboards and other parts, visit the Supermicro Web site at www.supermicro.com. Hot-swappable motherboards feature different adapter cards, depending upon the motherboard.
Page 95 Chapter 6: Advanced Chassis Setup Installing the Serverboard 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, cautions, and cable connections. 2. Remove the motherboard node from the back of the chassis. It is not necessary to power down the entire system.
Page 96: Installing An Daughter Card
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Installing an Daughter Card The daughter card is connected to the motherboard's backplane and provides hot- swappable functionality to the node. Figure 6-12. Daughter Card Installation Daughter Card Serverboard Drawer Six Screws Removing the Daughter Card 1.
Page 97: 6-10 Adding An Expansion Card
Chapter 6: Advanced Chassis Setup 6-10 Adding an Expansion Card The SC217 chassis supports expansion cards. Riser cards are used to mount the expansion cards. The SC217HD model accepts two low-proﬁ le expansion cards per node, for a total of four in the chassis. Figure 6-13.
Page 98: 6-11 Drive Bay Installation/Removal
1" high, SATA drives in the system. Note: Refer to the following FTP site for RAID setup guidelines: <ftp://ftp.supermicro. com/driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf> and Supermicro's web site for additional inmformation < http://www.supermicro.com/support/manuals/>. The SC217 chassis contains four individual motherboards in separate node drawers.
Page 99 Chapter 6: Advanced Chassis Setup Removing Hard Drive Trays from the Chassis (Figure 6-17) 1. Press the release button on the drive tray. This extends the drive bay handle. 2. Use the handle to pull the drive out of the chassis. Figure 6-17.
Page 100 Figure 6-18. Chassis Drive Tray Dummy Drive Hard Drive Carrier Warning: Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at http://www.supermicro.com/products/nfo/ﬁ les/ storage/SAS-CompList.pdf 6-16...
Page 101: Power Supply
Replacement units can be ordered directly from Supermicro (See the contact information in the Preface of this manual). The SC217 chassis utilizes redundant, hot-plug power supplies.
Page 102 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes 6-18...
Page 103: Chapter 7 Bios
The conﬁ guration data that determines the system parameters may be changed by entering the AMI BIOS setup utility. This Setup utility can be accessed by pressing <Delete> at the appropriate time during system boot. Note: For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recovery User Guide posted @http://www.supermicro.com/support/manuals/.
Page 104: Starting The Setup Utility
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Starting the Setup Utility Normally, the only visible Power-On Self-Test (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS setup utility. From the main menu, you can access the other setup screens.
Page 105 Day MM/DD/YY format. The time is entered in HH:MM:SS format. (Note: The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.). Supermicro X9DRT-P/-PT/-PIBQ/-PIBF VersionThis item displays the SMC version of the BIOS ROM used in this system.
Page 106: Advanced Setup Confi Gurations
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Advanced Setup Conﬁ gurations Select the Advanced tab to access the following submenu items. Boot Features Quiet Boot Use this feature to select bootup screen display between POST messages and the OEM logo. Select Disabled to display the POST messages. Select Enabled to display the OEM logo instead of the normal POST messages.
Page 107 Chapter 7: BIOS Wait For 'F1' If Error Select Enabled to force the system to wait until the 'F1' key is pressed when an error occurs. The options are Disabled and Enabled. Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the BIOS ROM of the host adaptors will "capture"...
Page 108 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL  CPU Conﬁ guration This submenu displays the following information of the CPU as detected by the BIOS. It also allows the user to conﬁ gure CPU settings.  Socket 1 CPU Information, Socket 2 CPU Information This submenu displays the following information regarding the CPUs installed in Socket 1 and Socket 2.
Page 109 Chapter 7: BIOS Hyper-threading Select Enabled to support Intel's Hyper-threading Technology to enhance CPU performance. The options are Enabled and Disabled. Active Processor Cores Set to Enabled to use a processor's second core and above. (Please refer to Intel's website for more information.) The options are All, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, and 11. Limit CPUID Maximum Use this feature to set the maximum CPU ID value.
Page 110 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL DCU IP Prefetcher Select Enabled for DCU (Data Cache Unit) IP Prefetcher support, which will prefetch IP addresses to improve network connectivity and system performance. The options are Enabled and Disabled. ® Intel Virtualization Technology (Available when supported by the CPU) Select Enabled to support Intel Virtualization Technology, which will allow one platform to run multiple operating systems and applications in independent partitions, creating multiple "virtual"...
Page 111 Chapter 7: BIOS C1E (Available when Power Technology is set to Custom) Select Enabled to enable Enhanced C1 Power State to boost system performance. The options are Enabled and Disabled. CPU C3 Report (Available when Power Technology is set to Custom) Select Enabled to allow the BIOS to report the CPU C3 State (ACPI C2) to the operating system.
Page 112 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Recommended Short Duration Power Limit This item displays the short duration power settings (in watts) recommended by the manufacturer. Short Duration Power Limit This item displays the time period during which short duration power (in watts) is maintained.
Page 113 Chapter 7: BIOS IIO 1 PCIe Port Bifurcation Control This submenu conﬁ gures the following IO PCIe Port Bifurcation Control settings for IIO 1 PCIe ports to determine how the available PCI-Express lanes to be distributed between the PCI-Exp. Root Ports. CPU1 Slot1 PCI-E Link Speed Select GEN1 to enable PCI-Exp Generation 1 support for the port speciﬁ...
Page 114 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL QPI (Quick Path Interconnect) Link Speed Mode Use this feature to select data transfer speed for QPI Link connections. The options are Fast and Slow. QPI Link Frequency Select Use this feature to select the desired QPI frequency. The options are Auto, 6.4 GT/s, 7.2 GT/s, and 8.0 GT/s.
Page 115 Chapter 7: BIOS Memory Mode When Independent is selected, all DIMMs are available to the operating system. When Mirroring is selected, the motherboard maintains two identical copies of all data in memory for data backup. When Lock Step is selected, the motherboard uses two areas of memory to run the same set of operations in parallel.
Page 116 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Data Scrambling Select Enabled to enable data scrambling to ensure data security and integrity. The options are Disabled and Enabled. Device Tagging Select Enabled to support device tagging. The options are Disabled and Enabled. Thermal Throttling Throttling improves reliability and reduces power consumption in the processor via automatic voltage control during processor idle states.
Page 117 Chapter 7: BIOS Legacy USB Support (Available when USB Functions is not Disabled) Select Enabled to support legacy USB devices. Select Auto to disable legacy support if USB devices are not present. Select Disabled to have USB devices available for EFI (Extensive Firmware Interface) applications only. The settings are Disabled, Enabled and Auto.
Page 118 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Port 0 ~ Port 5 Hot Plug This feature designates the port speciﬁ ed for hot plugging. Set this item to Enabled for hot-plugging support, which will allow the user to replace a SATA disk drive without shutting down the system. The options are Enabled and Disabled. Port 0 ~ Port 5 SATA Device Type This feature conﬁ...
Page 119 Chapter 7: BIOS Port 0 ~ Port 5 Spin Up Device On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRESET initialization sequence to the device. The options are Enabled and Disabled.
Page 120 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL SCU Ports 0~3 The status of each of the SCU ports indicated above will be displayed. PCIe/PCI/PnP Conﬁ guration Launch Storage OPROM Policy This feature controls how the system executes UEFI (Uniﬁ ed Extensible Firmware Interface), and legacy storage OPROM. Select Legacy Only to boot the system using a legacy device installed in a PCI slot.
Page 121 Chapter 7: BIOS Above 4G Decoding (Available if the system supports 64-bit PCI decoding) Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address. The options are Enabled and Disabled. CPU1 Slot 1 PCI-E 3.0 x16 OPROM/ CPU1 Slot 2 PCI-E 3.0 x8 OPROM Select Enabled to enable Option ROM support to boot the computer using a device installed on the slot speciﬁ...
Page 122 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Device Settings This item displays the settings of Serial Port 1 (COM). Change Settings This option speciﬁ es the base I/O port address and the Interrupt Request address of Serial Port 1 (COM). Select Disabled to prevent the serial port from accessing any system resources.
Page 123 Chapter 7: BIOS Serial Port Console Redirection This submenu allows the user to conﬁ gure the following Console Redirection settings for this Port. Console Redirection Select Enabled to use the SOL Port for Console Redirection. The options are Enabled and Disabled. This submenu allows the user to conﬁ...
Page 124 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Parity A parity bit can be sent along with regular data bits to detect data transmission errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits is even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits is odd.
Page 125 Chapter 7: BIOS Redirection After BIOS Post Use this feature to enable or disable legacy console redirection after BIOS POST. When set to Bootloader, legacy console redirection is disabled before booting the OS. When set to Always Enable, legacy console redirection remains enabled when booting the OS.
Page 126 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Flow Control This feature allows the user to set the ﬂ ow control for Console Redirection to prevent data loss caused by buffer overﬂ ow. Send a "Stop" signal to stop sending data when the receiving buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty.
Page 127 Chapter 7: BIOS Trusted Computing (Available when a TPM device is detected by the BIOS) Conﬁ guration TPM Support Select Enabled on this item and enable the TPM jumper on the motherboard to enable TPM support to improve data integrity and network security. The options are Enabled and Disabled.
Page 128 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Intel TXT (LT-SX) Conﬁ guration Intel TXT (LT-SX) Hardware Support This feature indicates if the following hardware components support the Intel Trusted Execution Technology. CPU: TXT (Trusted Execution Technology) Feature Chipset: TXT (Trusted Execution Technology) Feature Intel TXT (LT-SX) Conﬁ...
Page 129 Chapter 7: BIOS • Commit Changes and Exit • Discard Changes and Exit • Change Attempt Order • Commit Changes and Exit • Discard Changes and Exit Intel® I350 Gigabit Network Connections These items display the following information on the Intel I350 LAN connections. NIC Conﬁ...
Page 130: Event Logs
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Event Logs Select the Event Logs tab to access the following submenu items.  Change SMBIOS Event Log Settings This feature allows the user to conﬁ gure SMBIOS Event settings. Enabling/Disabling Options SMBIOS Event Log Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during system boot.
Page 131 Chapter 7: BIOS PCI Error Logging Support Select Enabled to support error event logging for PCI slots. The options are Enabled and Disabled. Erasing Settings Erase Event Log Select Enabled to erase the SMBIOS (System Management BIOS) Event Log, which is completed before a event logging is initialized upon system reboot.
Page 132: Ipmi
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL IPMI Select the IPMI (Intelligent Platform Management Interface) tab to access the following submenu items. IPMI Firmware Revision, IPMI Status These items indicates your system IPMI ﬁ rmware revision number and status.  System Event Log SEL Components Select Enabled for all system event logging at bootup.
Page 133 Chapter 7: BIOS When SEL is Full This feature allows the user to decide what the BIOS should do when the system event log is full. Select Erase Immediately to erase all events in the log when the system event log is full. The options are Do Nothing and Erase Immediately. Custom EFI Logging Options Log EFI Status Codes Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error...
Page 134: Boot
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Station IP Address This item displays the Station IP address for this computer. This should be in decimal and in dotted quad form (i.e., 192.168.10.253). Subnet Mask This item displays the sub-network that this computer belongs to. The value of each three-digit number separated by dots should not exceed 255.
Page 135 Chapter 7: BIOS Set Boot Priority This option prioritizes the order of bootable devices that the system to boot from. Press <ENTER> on each entry from top to bottom to select devices. • 1st Boot Device • 2nd Boot Device •...
Page 136: Security
SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL  Delete Driver Option This feature allows the user to delete a previously deﬁ ned boot device from which the systems boots during startup. The settings are [any pre deﬁ ned boot device] Security This menu allows the user to conﬁ gure the following security settings for the system.
Page 137: Save & Exit
Chapter 7: BIOS Save & Exit This submenu allows the user to conﬁ gure the Save and Exit settings for the system. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system conﬁ guration, and reboot the computer. Select Discard Changes and Exit, and press <Enter>.
Page 138 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Save Options Save Changes Select this option and press <Enter> to save all changes you've done so far and return to the AMI BIOS utility Program. When the dialog box appears, asking you if you want to save conﬁ guration, select Yes to save the changes, or select No to return to the BIOS without making changes.
Page 139: Appendix A Bios Error Beep Codes
Appendix A: BIOS Error Beep Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-Test) routines, which are performed each time the system is powered on, errors may occur. Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process.
Page 140 SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL Notes...
Page 141: Appendix B System Specifi Cations
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size sizes of 1.5V or 1.35V voltages. Note: refer to Section 5-5 for details on installation. Note: Check the Supermicro website (www.supermicro.com) for the latest memory support information.
Page 142 SUPERSERVER 2027PR-DTR/DTFR/DTTR User's Manual Chassis SC217HD+-R1K28B (2U rackmount) Dimensions: (WxHxD) 17.25 x 3.47 x 28.5 in. (438 x 88 x 724 mm) Weight Gross (Bare Bone): 85 lbs. (38.6 kg.) System Cooling The system has four (4) 8-cm PWM system cooling fans Note: The system cooling fans are NOT redundant, hot-plug.
Page 143 Appendix B: System Speciﬁ cations Notes...
Page 144 SUPERSERVER 2027PR-DTR/DTFR/DTTR User's Manual (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signiﬁ...

This manual is also suitable for:

Supero superserver 2027pr-dtfr Supero superserver 2027pr-dttr

Supermicro Supero SUPERSERVER 2027PR-DTR User Manual

Chapter 1 Introduction

Chapter 2 Server Installation

Chapter 3 System Interface

Chapter 4 Standardized Warning Statements for AC Systems

Chapter 5 Advanced Serverboard Setup

Chapter 6 Advanced Chassis Setup

Chapter 7 BIOS

Appendix A BIOS Error Beep Codes

Appendix B System Specifi Cations

Quick Links

Related Manuals for Supermicro Supero SUPERSERVER 2027PR-DTR

Summary of Contents for Supermicro Supero SUPERSERVER 2027PR-DTR

This manual is also suitable for:

Table of Contents