Led Indicators - Supermicro SuperServer 2029TP-HC0R User Manual

Manufacturing Mode Select
Close JPME1 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings. See the table below for jumper settings.

4.5 LED Indicators

LAN LEDs
Two LAN ports (LAN 1 and LAN 2) are located on the I/O back panel of the motherboard.
Each Ethernet LAN port has two LEDs. The green LED indicates activity, while the other Link
LED may be green, amber, or off to indicate the speed of the connection. Refer to the tables
below for more information.
LAN1/2 Activity LED (Right)
Color Status
Green Flashing
Dedicated IPMI LAN LEDs
In addition to LAN1 and LAN2, an IPMI LAN is also located on the I/O back panel. The
amber LED on the right of the IPMI LAN port indicates activity, while the green LED on the
left indicates the speed of the connection. See the table below for more information.
IPMI LAN LEDs
LED Color/State
Green: Solid
Link (left)
Amber: Solid
Activity (right) Amber: Blinking
Manufacturing Mode Select
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
LED State
Definition
Active
Definition
100 Mb/s
1Gbps
Active
65
Chapter 4: Motherboard Connections
LAN1/2 Link LED (Left)
LED State
LED Color Definition
Green 10Gbps
Yellow/Amber 1Gbps
LAN 1/LAN 2
IPMI LAN
Link LED Activity LED
IPMI LAN
(X8ST3-F)