- Gold plated dads for the very best connectivity - Firmware perfection via CleanFlight & BetaFlight - Support telemetry - Full USB support - Ultra compact design for ease of installation - BLHeli ESC Pass through works fine on Racewhoop. - Receiver mode - serial based receiver...
http://furiousfpv.com/ Serial based receiver support If you are using SBus, iBus or a Spektrum Satellite, you will need to pick your Serial Receiver Provider. Follow this table: RX Type Serial Receiver Provider DSM2 Satellite SPEKTRUM1024 DSMX Satellite SPEKTRUM2048 FrSky RX SBUS Futaba RX SBUS...
Page 6
http://furiousfpv.com/ Port configure: NOTE: When use FrSky XM / XM+ receiver you need TURN ON Sbus inversion in CLI tab. See guide set SBUS at here.
Furious FPV FrSky LR1000 / LR1000D receiver Port configure: NOTE: When use FrSky XM / XM+ receiver you need TURN OFF Sbus inversion in CLI tab (Default is Turn Off). See guide set SBUS at here.
http://furiousfpv.com/ Satellite Spektrum Port configure: You can use Betaflight to bind receiver with transmitter with CLI. See clip guide Bind Satellite at here.
Software Firmware: Acrowhoop FC use Betaflight hex you can download directly from FuriousFPV product page. Download at here Software: Download Betaflight Support: Sale: sales@furiousfpv.com Technical: tech@furiousfpv.com Facebook: Furious FPV Official Public Group...
Need help?
Do you have a question about the RACEWHOOP and is the answer not in the manual?
Questions and answers