Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
Figure 3-1 shows the front panel of AM8010 and its parameter
display. There are four function keys that are defined as followings：
MENU
: MENU KEY,
: INCREMENT KEY,
: DECREMENT KEY, and
: RIGHT SHIFT and RETURN KEY.
The top panel of AM8010 is shown in Figure 3-2. There are three
interfaces: "SENSOR，"USB or EXT POWER" and power
switch "OFF/ON".
Figure 3-2: AM8010 Top Panel
A foldable tilt foot support is mounted on the back of AM8010. It
helps user to put the meter in a stable position with a display angle.
There is a battery cover on the back side of AM8010 Precision
Thermometer. Two AAA size batteries are used to power the meter.
A sliding switch besides the battery holder can be seen when the
battery cover is opened. This switch is used for calibration only.
Warning: Inappropriate setting change to this switch can cause loss
of calibration data. Instructions of using this switch are shown in
4.1.
Rev. 201609V3
5/30
Advertisement
Table of Contents
