Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
SENSOR =
IPRT
PRT
Menu = Exit
7. As illustrated in the above Figure, the first line shows the
current sensor type. If the connected sensor type is different
from the current setting (IPRT for example), the sensor type
needs to be changed. Moving the highlight line to the correct
line by press
program will move into parameter adjustment section as
illustrated in step 8.
8. For example，if IPRT is selected，the LCD displays the
following：
SET R0
SET A
SET B
The user can adjust R0, A, B and C in this section. Press
key to select and press
when adjustments are done.
9. If PRT is selected, the LCD displays the following：
SET Rtp
Rev. 201609V3
Enter = Yes
or
, and then press
IPRT SETTING
MENU
PRT SETTING
SET a
SET b
IPRT
key to go back to previous screen
key to select. The
18/30
Advertisement
Table of Contents
