Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
f) Click on the "Start" button, the software should show the
measurement data as follows:
g) Users can use the "Data Saving" function at the right side to
save the data if needed. The first step is to set the sampling
rate. The above Figure shows the "Data Saving" and the
default sampling rate is 1 sec. if other sampling rates are
required, users can key in other integer numbers between 1 to
65535 seconds. Users can start to record data by clicking on
the "REC" button. To end the data recording, just click on the
"END" button. The captured data are saved to a file with
name of"cool_data.txt".
h) To stop data measurement, click on "Stop"。
i) To quit the software, click on "Exit"。
Rev. 201609V3
15/30
Advertisement
Table of Contents
