Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
The user can adjust Rtp, A4, B4, A, B and C in this section.
Press
previous screen when adjustments are done.
10.
The following are examples of setting R0 and A4 values.
The adjustment of the other parameters can be done in similar
way.
I. R0 adjustment：
i. Continue from 6.1.8，press
ii. The value of second line shows the current R0
iii. After R0 is adjusted，press
iv. The second line should flash to remind the user to
Rev. 201609V3
key to select and press
will show：
R0
100.0100
Menu = Save
value. The cursor shows the adjust position. To
modify the value, press
value up or down. Pressing
cursor to next position. After the last digit is
finished, pressing
to the most left position. There is no left shift key.
should show：
SAVE R0
100.0000
Menu = No
save the new value. If users do not want to save
MENU
key to go back to
key and the LCD
OHM
Enter = Shift
or
to adjust the
will shift the
again will move the cursor
MENU
key and the LCD
Enter = Yes
19/30
Advertisement
Table of Contents
