Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
II. To adjust a4 value, continue from 6.1.9.
i. Move the highlight line by pressing
ii. The first line is the current a4 value. The second
iii. The flashing cursor shows the adjustable digit.
Rev. 201609V3
this value, press
want to save this new value, press
R0 value will be saved into the meter. The
program will go back to 6.1.8.
multiple times until "SET a4" is highlighted. Press
to select, the LCD should show：
a4= - 4.129934e-05
SET a4 =0
ADJUST a4
Menu = Exit
line should be selected if a4=0. The third line
allows the user to adjust the a4 value. Press
to move the highlight line. If a4 needs to be
adjusted, move the highlight line to "ADJUST a4"
then press
. The LCD should show：
SET a4
- 4.129934 e - 05
Menu = Save
Pressing
or
Pressing
will move the cursor to the right
position. If the cursor is at the far right position,
MENU
to quit the adjustment; if users
Enter = Yes
Enter = Shift
change the value up or down.
. The new
key
or
20/30
Advertisement
Table of Contents
