Ip Audio Sender 1/2/3 - DEVA Broadcast DB91-TX Maintenance And Operation Instruction Manual

IP Audio Sender 1/2/3

DB91-TX has 3 multirole IP Audio senders. Each can be assigned to act as RTP Sender, Icecast
Source Client or SHOUTcast v1 Source. To ensure more flexibility, the 3 IP Audio senders can
use any of the available audio codecs. Depending on the currently selected Type, different set of
settings should be applied:
RTP Sender Settings
If DB91-TX is used as a RTP Sender, the decoders' Server Address and Port should be filled in
the respective fields:
• Address – URL or IP Address of the RTP Receiver.
• Port – UDP port of the RTP Receiver.
• Payload type – Allows specific payload type to be set in order for the receiver to recognize
it. If 127 is set as value, the DB91-TX will set payload type based on the codec.
The RTP sender supports multicast streaming. In this mode Multicast Group address should be
entered in the Address field.
Icecast Source Client Settings
If DB91-TX is used as an Icecast Source Mount point, Encoder IP Address and Port should be
filled in. The username and password are used to secure the connection. Make sure to enter the
same information on both sides of the connection.
• Address – URL or IP Address of the Icecast Distribution Server;
• Port – TCP port of the Icecast Distribution Server;
• Mount point – is a unique name on your server identifying a particular stream. A listener can
only listen to a single mount point at a time. This means you can have a single Icecast server
contain either multiple broadcasts with different content, or possibly the same broadcast
but with streams of different bitrates or qualities. In this case each broadcast or stream is a
separate mount point.
• Username – Username for Authentication with Icecast Receiver.
• Password – Password for Authentication with Icecast Receiver.
SHOUTcast Source Settings
If DB91-TX is used as a SHOUTcast v1 Source, Encoder IP Address and Port should be filled
in. The password is used to secure the connection. Make sure to enter the same information on both
sides of the connection.
NOTE: The selected encoder must match the settings of the decoders on the other side of the
connection.
NOTE: In order the applied settings to be used press the [Save] button, placed on the bottom
right part of the screen.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
- 24 -