Ip Audio Settings; Analog Audio Output Settings - DEVA Broadcast DB90-RX Maintenance And Operation Instruction Manual

Ip audio decoder

Hide thumbs Also See for DB90-RX:

Table of Contents

IP Audio Settings

• URL – URL of the stream server. Up to 3 URLs can be defined. Up to 63 characters can be

entered.

• Decoder + Sample rate – Select decoder and sample rate. For PCM (uncompressed) sample

rate can be 32, 44.1 or 48 kHz. For HE-AAC and MPEG1 sample rate is determined

automatically from the stream. Default value is HE-AAC / auto.

• Channels – Number of channels in PCM stream: 1 or 2.

stream.

• Prebuffer – Minimum size of data in buffer before playing starts. Must be in the

range10240-65535. Default value is 32768.

• Buffering timeout – Seconds to wait for buffer to fill up. If the timeout is reached the device

will skip to next server. Default value is 30s.

• Gain Adjust - Audio gain adjust from -10 to 10 dB. Default value is 0dB.

NOTE:

"Gain Adjust" is digital. If the sum of Signal Level and Gain is greater than 0dBFs the

signal will be distorted.

• Analog Level – Analog output volume from 0 to 100%. Default value is 100%.

NOTE:

In order to ensure normal operation when PCM is used, it is necessary to select the

same sample rate at both encoding and decoding side.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

NOTE:

- 20 -

This is not used for encoded

Table of Contents