Db90-Rx Ip Audio Client Set-Up - DEVA Broadcast DB90-TX Setup Instructions

DB90-RX IP AUDIO CLIENT SET-UP

1. Go to Configuration> IP Audio;
2. In IP Audio Client section – URL of the DB90-TX Server should be specified. The URL is a
mandatory requisite needed in order for a connection with the server to be established. The
URL could be compound of DB90-TX's IP Address and Server Port, ex. 192.168.120:5000;
3. Choose the preferred decoder, prebuffer and specify buffer timeout. The decoder set in
the DB90-RX must match the encoder specified in DB90-TX;
4. If needed, set new gain adjustment settings;
5. From the Source priority Section set the priority of the IP Audio Client;
6. Press [Save] to save the applied changes;
7. Apply the same settings to all IP Audio clients to be used in the configuration.
For detailed information and instructions on how communication with the DB90-RX can be
established, please refer to
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
"Appendix B - DB90-RX Quick User Guide" on page
- 7 -
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
12.