Hardware Reset; Network Default Settings; Web Server Default Settings - DEVA Broadcast DB91-TX Maintenance And Operation Instruction Manual

Compact ip audio encoder

Hide thumbs Also See for DB91-TX:

Table of Contents

HARDWARE RESET

This process will fully restore DB91-TX to its Factory Defaults, including the Network settings.

Hardware Reset can be done by following the next steps:

1. Disconnect the power supply cable from the unit;

2. Locate the RESET button on Rear panel;

3. Press and hold the RESET button;

4. Connect the power supply cable to the unit;

5. Keep the RESET button hold until the POWER led starts blinking;

6. Release the RESET button;

7. Wait for DB91-TX to reboot.

Upon completion of the process DB91-TX settings will have the following values:

•

DHCP: enabled

Port: 80

•

Username: user

Password: pass

•

NOTE:

Upon completion of the process, the DHCP Client is enabled, and the DB91-TX will

obtain IP Address from DHCP server shortly.

ATTENTION:

Please note that the WEB Server's Port, Username and Password will be

changed, so it is possible the page not to be loaded after restoring factory defaults. You may be

asked to re-enter the encoder's address and/or username and password.

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

- 30 -

Table of Contents