Updating Of The Firmware - Pioneer XDJ-R1 Service Manual

1

8.2 UPDATING OF THE FIRMWARE

A [Preparations]
1 Download the zipped updater file for the latest firmware from Niis.
2 Unzip the downloaded file.
Unzipping the ZIP file generates the "XDJ-R1Vxxx.bin". (xxx: version number)
3 Copy an unzip file to a root folder of USB device.
Use USB device formatted in FAT/FAT32.
[Procedure]
B
1 The unit where no MEDIA is inserted is powered on while the USB and SHIFT and USB STOP button of DECK 1 are
pressed.
The buttons should be continuously pressed until [download] is displayed in the dot display area.
2 The firmware is copied to a USB device formatted to FAT/FAT32 and inserted to the unit.
Note: Be sure not to store multiple updater files in one USB device.
3 The following display is shown during the update.
DOWNLOAD MODE
C
Update progress is displayed in Playing Address Section.
D
When the update is completed, the following display appears.
E
4 After updating is completed, turn the unit off, unplug the USB device, then turn the unit back on.
5 Check in Version Check mode of Service mode to verify that updating succeeded.
* A version down is possible.
Firmware update recovery when it is failed:
• If the firmware update is failed in such a case as turning off the power in the middle of the update, any subsequent control is
F
not available.
• When Error code E-7024 appears, recovery mode starts to continue the update again if appropriate USB update procedures
are taken.
40
1
2
XDJ-R1
2
3
3
4
4