Each Setting And Adjustment; Necessary Items To Be Noted - Pioneer XDJ-R1 Service Manual

5

8. EACH SETTING AND ADJUSTMENT

8.1 NECESSARY ITEMS TO BE NOTED

Please update firmware to the latest version at the repair necessarily.
Perform the each item when the following parts are replaced.
• IC storing firmware and PCB Assy
* The firmware storage IC information is as follows.
Target Firm ware
DSP (DSP Version)
SERVO (SERVO Version)
MIXER (MIXER Version)
CON (UI Version)
VFD (VFD Version)
• When replaced WHEEL Assy
• VRs with center click positions
* The VRs with center click positions are listed below.
VR Name
EQ-LOW
EQ-MID
CH1
EQ-HI
COLOR
EQ-LOW
EQ-MID
CH2
EQ-HI
COLOR
HEADPHONES MIXING
MIC EQ
PLAYER1 LEVEL/DEPTH
PLAYER2 LEVEL/DEPTH
After the IC812 (SERVO/MIXER IC), I/O Assy, or Wi-Fi PCB Assy is replaced, the SSID will be changed.
(As for the Wi-Fi PCB Assy, the SSID will be changed when resetting to factory default is performed after replacement.)
When returning the repaired product to the customer, be sure to tell the customer that resetting of the wireless LAN
connection will be required.
5
6
Storage IC
Device Name
DSP IC (Flash ROM)
SERVO/MIXER IC
(CD MCU)
CONTROL IC (UI MCU)
VFD IC (VFD MCU)
Ref No. PCB Assy
VR200
VR204
VR205
VR217
VR208
MIXER Assy
VR215
VR213
VR216
VR202
VR209
VR100 CD1 Assy
VR100 CD2 Assy
XDJ-R1
6
7
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
PCB Assy
Ref No.
IC803 DSP & POWER Assy
IC812 I/O Assy
IC200
MIXER Assy
IC207
• Confirmation of the specified value by the JOG dial
load measurement mode
• Perform "8. Center setting for the controls"
in "6. SERVICE MODE."
7
8
A
B
C
D
E
F
39
8