Error Code List - Pioneer XDJ-R1 Service Manual

1

5.3 ERROR CODE LIST

A If an error is generated, the error code may be shown on the display, depending on the type of error.
The error codes and descriptions of errors are listed below. The track No. at which an error was generated will be also shown
on the display.
Error indication
E-6002 DSP DEVICE ERROR
• The DSP does not operate normally.
• A program is not downloadable.
E-7024 MAIN CPU ERROR
• The main Ucom does not operate normally.
B
E-7201 CANNOT READ DISC
• TOC data cannot be read.
E-8301 CANNOT READ DISC
• A desired address was not able to be searched.
• An address cannot be read.
• A focal servo cannot be closed.
• A pickup does not return to inner circumference.
E-8302 CANNOT PLAY TRACK
• A desired address was not able to be searched.
• An address cannot be read.
C
• A focal servo cannot be closed.
• FILE OPEN ERR
E-8303 CANNOT PLAY TRACK
• A buffer write-in error.
E-8304 UNSUPPORTED FILE FORMAT
• Decoding error.
E-8305 UNSUPPORTED FILE FORMAT
• A not corresponding format.
E-8307 USB ACCESS ERROR
D
• Not corresponding USB apparatus was connected.
E-8709 COMMUNICATION ERROR
• Communication of "UI Ucom" and "DSP" cannot be
performed.
E-9101 MECHANICAL TIMEOUT
• A mechanical operation could not be completed within the
specified time.
E
F
20
1
2
Error contents
XDJ-R1
2
3
Remarks
ERROR at the time of POWER ON.
It becomes this error, when update of a Ucom goes
wrong and the MAIN Ucom operates by an
emergency function.
ERROR at the time of POWER ON.
It does not display, when music is LOAD (ed) from
USB.
It does not display, when music is LOAD(ed) from
USB.
Abnormalities occurred during starting.
Abnormalities occurred during playback.
An unsupported USB device is connected.
This error code is displayed when no communication
is established between the UI Ucom and DPS,
because of inappropriate connection, etc.
ERROR at the time of POWER ON.
3
4
4