Page 1
DJ SYSTEM XDJ-AERO VirtualDJ Pro 7 Connection Guide...
Page 2
XDJ-AERO is connected with a computer by USB cable. The Atomix “VirtualDJ Pro 7” DJ software can be controlled using this unit. Furthermore, the XDJ-AERO can also be used as the VirtualDJ Pro 7 audio output device.
Page 3
Connections Connect the XDJ-AERO and computer using a USB cable. One USB cable is required. Connections with VirtualDJ Pro 7 To power outlet Computer Power cord (included) VirtualDJ Pro 7 USB cable AC adapter (included) SIGNAL LINE PHONO LINE PHONO DC IN MASTER OUT2 MASTER OUT1(TRS) PHONO2 / LINE2 PHONO1 / LINE1 MIC ATT.
Installing the driver software Install this unit’s driver software onto the computer from the CD-ROM included with this unit. For installation instructions, see “Installing the driver software” in the XDJ-AERO’s operating instructions. Connecting this unit and the computer With this unit’s power turned on, connect this unit and the computer using a USB cable.
Page 5
2 Turn the rotary selector to select [MIXER MODE], then press the rotary selector. 3 To use this unit’s mixer section to mix the sound: Turn the rotary selector to select [XDJ-AERO], then press the rotary selector. To mix the sound internally in VirtualDJ Pro 7: Turn the rotary selector to select [PC], then press the rotary selector.
Page 6
*1 The jog mode switches each time the JOG DRUM button is pressed. When the JOG DRUM button is off (lit dimly), the XDJ-AERO operates in the vinyl mode (jog dial indicators lit blue) or CD mode (jog dial indicators lit blue, flashing red).
Page 7
2. Effect SAMPLE LAUNCH XDJ-AERO buttons Function When SHIFT button is on indicator status e BEAT control — Effect Parameter1 Effect Select Lit dimly Effect On/Off — Lit brightly Hot Cue1 Delete Hot Cue1 FX SELECT (TRANS) Deck 1,3 : Sampler1 Play/Stop —...