Bosch KM3211WH Installation & Owners Manual page 19

On this Display
Modification of the timer setting
Cancel the settings as per the following "Cancellation of
timer operation" procedure, and then re-set in accordance
with the procedure detailed on Pages 17 - 18.
Confirmation of timer setting
Follow procedures 1 - 2 of "Cancellation of
timer operation", and check the timer setting
on the screen under procedure 3.
Cancellation of timer operation (when instant hot water is regularly operated)
1
2
3
Unlit
Operation
Press the SET
button to change the
display to "pre-heat".
Use the
button to select the
"cycle".
Use the button
to select "Cancel".
Here
< Completion of
cancellation >
Description
* Pressing the SET button, or leaving
it unattended for about 20 seconds,
finalizes the confirmation screen.
* "Cycle-on" is displayed
instantly.
* The timer settings are
memorized even after being
cancelled.
19