Running Hot Water - Bosch KM3211WH Installation & Owners Manual

When using RCM3211

Running Hot Water

On this Display
1
2 Check
Previous set temperature
(Eg.: 40°C)
WARNING
Be especially careful if using hot water after previously using water at 60°C or above to prevent scalding.
WARNING
This is to prevent scalding if the temperature rises. Conversely, if the temperature drops or the
power switch is turned "off", the user may be upset when the water suddenly becomes much colder.
Operation
Press the
ON/OFF
button to turn it
"On".
Turn on hot water.
Whenever using the hot water, such as when using the shower,
check the temperature shown on the remote controller first, and
then test the hot water temperature by hand.
While the shower is being used, no one other than the user
should change the temperature, the power switch must not be
turned "off". (when using sub remote controller.)
Description
* The is lit.
ON/OFF
* When Circulation is on, the
symbol blinks and circulation mode
starts automatically. ( P15)
< Display detail >
Blinking
* This is lit during combustion.
Here
(Display example)
11