When Using Rcm3211; Clock Adjustment - Bosch KM3211WH Installation & Owners Manual

When using RCM3211

Clock Adjustment

On this Display
1
2
(Eg.: 40°C)
3
(Eg.: AM 10:15)
In the event of a power cut or after disconnecting the power supply, when the
power is restored, the clock on the display screen shows "0:00", so the clock
needs to be re-set.
10
Operation
Press the
ON/OFF
button to turn it
"On".
SET
Press the
button to change the
display until "time
set" is shown.
Use the buttons
to adjust the clock.
< Completion of setting >
Description
* The is lit.
ON/OFF
* When Circulation is on, the
symbol blinks and circulation mode
starts automatically. ( P15)
< Display detail >
Blinking
* The time changes in 1-minute
increments with each press on the
button, and then in 10-minute
increments if the button is kept
pressed down.
* When the SET button is pressed,
or the console is left untouched for
about 20 seconds, the settings
screen ends.