Subscribe to Our Youtube Channel
Related Manuals for NatComm Multiple Modem Switch
Summary of Contents for NatComm Multiple Modem Switch
- Page 1 Multiple Modem Switch USER GUIDE For Technical Assistance Please Phone: (07) 5596 5128...
-
Page 2: Packing List
PACKING LIST Your MULTIPLE MODEM SWITCH is supplied as a complete kit, ready for quick and easy installation by the user. Description MULTIPLE MODEM SWITCH Line Sharing Unit 12V Power supply Telephone Line cord, fitted with a male plug RJ11 (6 pin) to RJ11 (6 Pin) connection cables... -
Page 3: Product Description
Modem facilities, and are required to RECEIVE INCOMING MODEM CALLS and share the same telephone line. Up to FOUR MULTIPLE MODEM SWITCH’s can be fitted to ONE LINE, to provide for connection of up to 8 separate devices. -
Page 4: Operation
Up to FOUR MULTIPLE MODEM SWITCHES can be fitted to ONE LINE, to provide for connection of up to 8 separate devices. ONE MULTIPLE MODEM SWITCH unit (called the MASTER) should be set to ANSWER incoming calls. All other MULTIPLE MODEM SWITCH units should have the ANSWER facility disabled. - Page 5 ONE MULTIPLE MODEM SWITCH unit, then this unit should be set up as the MASTER UNIT. If more than ONE MULTIPLE MODEM SWITCH unit is to be used, then you need to SET UP each unit as follows : MASTER UNIT (for a Fax and a Modem or for Two Modems) The DTMF Code for Device A = 1.
- Page 6 DTMF CONNECTION CODES To CONNECT to a MODEM fitted to any MULTIPLE MODEM SWITCH on the SHARED LINE, the calling MODEM must send one or more DTMF commands (single digit numbers from 1 to 8) which are entered at the end of the dial string.
- Page 7 National Communications Page 7...
-
Page 8: Installation
See Diagram on Page 7 1. Unplug all equipment from the telephone socket to be used. 2. Connect the LINE port of the MULTIPLE MODEM SWITCH to the telephone socket, using the supplied telephone line cord fitted with a male plug. See Diagram on page 7. - Page 9 National Communications Page 9...
- Page 10 SECOND unit (Ie; connected in daisy fashion). 3. Connect the FAX MACHINE (if used) to the DEVICE A port of the FIRST (MASTER) MULTIPLE MODEM SWITCH, using the supplied RJ 6 pin to RJ 6 pin connection cable.
-
Page 11: Installation Cont
INSTALLATION Cont Multiple Units 6. Connect all OTHER MODEMS to the Device A and Device B ports of all OTHER MULTIPLE MODEM SWITCH units. 7. Set all connected FAX and/or MODEM devices to AUTO ANSWER on the 1st or 2nd ring. -
Page 12: Specifications
SPECIFICATIONS Dimensions (all in mm) 106 (W) x 106 (D) x 43 (H) Weight 200g Power Supply 230VAC to 12VAC/500mA Power Consumption Idle - 0.5 Watts Voice Call - 0.75 Watts `Ringer Equivalence 0.3 REN Telephone Connectors RJ 11 6 pin (2 centre) Power Connector 2.5mm barrel connector ACMA COMPLIANCE...
Need help?
Do you have a question about the Multiple Modem Switch and is the answer not in the manual?
Questions and answers