Service Processor Description - Hitachi G200 Hardware Reference Manual

Processor
Memory
Hard drive
Network interface card
Fans
Operating system

Service processor description

The SVP provides four RJ-45 ports:
Two ports connect to the storage system controllers (one port for each controller).
■
One port connects to the IP network of the user.
■
One port connects to a user-supplied management console PC.
■
Note: This product is also designed for IT power distribution systems with
phase-to-phase voltage.
Three of the four RJ-45 ports (which connect to the controllers and the IP network) are
configured as a bridge. The SVP can be addressed using the default IP address
192.168.0.15.
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
Item
Chapter 5: Service processor
Service processor description
Specification
Weight: 14 lbs (6.4 kg)
Celeron G1820 2.7-GHz 2M, 2C, 2T
Cores: 2
■
Instruction set: 64-bit
■
SmartCache: 2 MB
■
Maximum memory size: 32 GB
■
Memory types: DDR3-1333,
■
DDR3L-1333 @ 1.5V
8-GB RAM DDR3
2 TB
x4 ports (on-board NIC) +
x1 IPMI (BMC) port
2 x 4-cm 4-pin PWM fans
Windows Embedded Standard 7
64