Installing the USB-2404-60
What comes with your USB-2404-60 shipment?
As you unpack your USB-2404-60, verify that the following components are included.
Hardware
USB-2404-60
USB cable (2 meter length)
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your USB-2404-60 and information regarding installation of that software.
Please read this booklet completely before installing any software or hardware.
Optional accessories
ACC-102 — Two-position screw terminal connector blocks (quantity ten). Additional details are available
on our web site at www.mccdaq.com/daq-accessory/acc-102.aspx.
ACC-160 — Backshell for use with the ACC-102 two-position screw terminal connector blocks. Provides
strain relief and operator protection from high-voltage signals (quantity six). Additional details are
available on our web site at www.mccdaq.com/daq-accessory/acc-160.aspx.
Unpacking the USB-2404-60
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-2404-60 from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If your USB-2404-60 is damaged, notify Measurement Computing Corporation immediately by phone, fax, or
e-mail.
Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
Fax: 508-946-9500 to the attention of Tech Support
Email:
techsupport@mccdaq.com
For international customers, contact your local distributor where you purchased the USB-2404-60. Click on this
link
www.measurementcomputing.com/sales.asp
to locate your distributor.
8
Chapter 2
Need help?
Do you have a question about the USB-2404-60 and is the answer not in the manual?
Questions and answers