Setting The Arming Source, Slope And Delay Types - YOKOGAWA TA320 User Manual

6.3 Setting the Arming Source, Slope and Delay
Types
P r o c e d u r e P r o c e d u r e
MODE
FUNCTION
DISPLAY
SAMPLE
INPUT
UTILITY
6-6
• To exit from the current menu, press any of the top menu keys or press the ESC touch key
displayed on the screen.
SAMPLE Top Menu
1. Press the SAMPLE key to display the SAMPLE top menu.
Displaying the arming menu
2. Press the ARMING touch key to display the arming menu. This setting is not available (the
ARMING touch key is not displayed) if EXTERNAL gate is selected.
Selecting the arming source
3. Press the SOURCE touch key to highlight SOURCE.
4. Turn the rotary knob to select the desired arming source.
If EXT (external arming) is selected at step 4, proceed to the following steps. If AUTO (auto
arming) is selected, the following steps will not be available.
Selecting the slope (edge) (required only when EXT arming is selected)
5. Press the SLOPE touch key to highlight
Selecting the arming delay type (required only when EXT arming is selected)
6. Press the DELAY touch key to highlight DELAY.
7. Turn the rotary knob to select the desired delay type.
Setting the delay time (required only when TIME is selected at step 7)
8. Press the D.TIME touch key to highlight D.TIME.
9. Use the ten-key to set the desired delay time.
≡ ≡ ≡ ≡ ≡ For a description of the function, refer to 1.5≡ ≡ ≡ ≡ ≡
Displays the arming menu.
(This touch key is not
displayed if EXTERNAL
gate is selected)
or . The highlighted slope will be selected.
IM 704210-01E