Display Evb S-Channel - HPE 5920 Series Command Reference Manual

Field
Remote RR status
Max ECP retry time
ULPPDU retransmission exponent
Resource wait-delay exponent
Reinit keep-alive exponent

display evb s-channel

Use display evb s-channel to display S-channel information.
Syntax
display evb s-channel [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface (Layer 2 Ethernet interface or
Layer 2 aggregate interface) by its type and number. If you do not specify an interface, the command
displays S-channel information for all interfaces with EVB enabled.
Examples
# Display S-channel information for Ten-GigabitEthernet 1/0/1.
<Sysname> display evb s-channel interface ten-gigabitethernet 1/0/1
RR status: D -- Disabled, E -- Enabled
MAC learning: A -- Allowed, F -- Forbidden
S-Channel
interface
SCH1/0/1:1
SCH1/0/1:100
Description
Whether or not the EVB station has enabled the RR mode after EVB
TLV negotiation:
•
Enabled.
•
Disabled.
•
Unknown.
Maximum ECP retransmission times in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
ECP retransmission exponent in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
VDP resource-wait-delay exponent in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
VDP keepalive exponent in this format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
SVID Uptime
yyyy/mm/dd hh:mm:ss
1 2012/12/17 03:43:13
100 2012/12/17 03:43:14
6
RR MAC VSI
status learning number
D A 0
D A 2