Evb Vsi - HPE 5920 Series Command Reference Manual

VDP resource-wait-delay
exponent
23
24
25
26
27
28
29
30
31
Examples
# Configure the VDP resource-wait-delay exponent on Ten-GigabitEthernet 1/0/1 as 23.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] evb vdp timer resource-wait-delay exponent 23
# Configure the VDP resource-wait-delay exponent on Bridge-Aggregation 1 as 23.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] evb vdp timer resource-wait-delay exponent 23

evb vsi

Use evb vsi to create a VSI interface or VSI aggregate interface.
Use undo evb vsi to remove a VSI interface or VSI aggregate interface.
Syntax
evb vsi vsi-local-id { association | pre-association }
undo evb vsi vsi-local-id
Default
No VSI interface or VSI aggregate interface exists on an S-channel.
Views
S-channel interface view, S-channel aggregate interface view
Predefined user roles
network-admin
Parameters
vsi-local-id: Specifies a VSI local ID in the range of 0 to 1023.
association: Specifies the association property. On a VSI interface with the association property, all
filters immediately take effect.
pre-association: Specifies the pre-association property. On a VSI interface with the pre-association
property, VLAN filters take effect, but <VLAN, MAC> filters are not effective.
Calculated value
(seconds)
83.88608
167.77216
335.54432
671.08864
1342.17728
2684.35456
5368.70912
10737.41824
21474.83648
19
Result value (seconds)
84
168
336
672
1343
2685
5369
10738
21475