Evb Vsi Filter - HPE 5920 Series Command Reference Manual

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

Usage guidelines
Configurations such as traffic monitoring on a VSI interface or VSI aggregate interface take effect
only after the VSI interface or VSI aggregate interface is activated. When a VSI interface or VSI
aggregate interface is not activated, do not make any configurations other than filters on the either
interface. For more information about traffic monitoring, see ACL and QoS Configuration Guide.
Activate a VSI interface or VSI aggregate interface after configuring a VSI filter, and deactivate a VSI
interface or VSI aggregate interface before removing a VSI filter.
Examples
# Activate S-Channel 1/0/1:10.1.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10.1
[Sysname–S-Channel1/0/1:10.1] evb vsi active
# Activate Schannel-Aggregation 1:10.1.
<Sysname> system-view
[Sysname] interface schannel-aggregation 1:10.1
[Sysname–Schannel-Aggregation1:10.1] evb vsi active
Related commands

evb vsi filter

evb vsi filter
Use evb vsi filter to configure a VSI filter.
Use undo evb vsi filter to remove a VSI filter.
Syntax
evb vsi filter [ group group-id ] vlan vlan-id [ mac mac-address ]
undo evb vsi filter [ group group-id ] [ vlan vlan-id [ mac mac-address ] ]
Default
No VSI filter exists.
Views
VSI interface view, VSI aggregate interface view
Predefined user roles
network-admin
Parameters
group group-id: Specifies a group ID that classifies VLAN IDs, in the range of 1 to 4094. When the
number of VLANs exceeds 4094, the group ID and VLAN ID together identify a VLAN.
vlan vlan-id: Specifies the VLAN ID in the range of 1 to 4094. The VLAN must exist.
mac mac-address: Specifies the MAC address, which must be a valid unicast MAC address.
Usage guidelines
The EVB bridge uses a VSI filter to identify VSI traffic for a VM. Filters are usually assigned by a VSI
manager. You can also manually create or remove a VSI filter by executing this command.
A VSI filter contains a set of VID values, MAC addresses, and group ID values. EVB supports the
following filter info formats:
VLAN ID
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents