Irf Member Description; Irf Member Priority - HPE FlexFabric 7900 series Command Reference Manual

Usage guidelines
You must assign an IRF member ID to a device before enabling IRF mode. The member ID takes
effect after IRF mode is enabled. This member ID must be unique among all IRF member devices.
To change the member ID of a device in IRF mode, use the irf member member-id renumber
new-member-id command. The new member ID takes effect at reboot.
Examples
# (In standalone mode.) Assign member ID 2 to the device.
<Sysname> system-view
[Sysname] irf member 2
Info: Member ID change will take effect after the member reboots and operates in IRF mode.
Related commands
irf member renumber

irf member description

Use irf member description to configure a description for an IRF member.
Use undo irf member description to restore the default.
Syntax
irf member member-id description text
undo irf member member-id description
Default
No description is configured for any IRF member.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
member-id: Specifies the ID of an IRF member. The IRF member ID can only be 1 or 2.
text: Configures the IRF member description, a string of 1 to 127 characters.
Usage guidelines
You can configure a description to describe the location or purpose of a member device.
This command is available in IRF mode. When you change the operating mode from IRF to
standalone, the IRF member description is lost, regardless of whether you have saved the
configuration.
Examples
# Configure a description for IRF member 1.
<Sysname> system-view
[Sysname] irf member 1 description F1Num001

irf member priority

Use irf member priority to change the priority of an IRF member.
14