HPE 5920 Series Command Reference Manual page 14

Current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e
Description: S-Channel1/0/1:10.1 Interface
Bandwidth: 1000000kbps
Last clearing of counters: Never
# Display brief information about S-Channel 1/0/1:10.1.
<Sysname> display interface s-channel 1/0/1:10.1 brief
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
SCH1/0/1:10.1
# Display brief information about all S-channel interfaces and VSI interfaces in DOWN state.
<Sysname> display interface s-channel brief down
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
SCH1/0/1:11
SCH1/0/1:11.1
Table 6 Command output
Field
Current state
Hardware Address
Description
Bandwidth
PVID
Port link-type
Trunk port encapsulation
Last clearing of counters
Input (total): 6 packets, 384 bytes
Output (total): 18 packets, 1152 bytes
Link Speed Duplex Type PVID Description
UP -- --
Link Cause
DOWN Not connected
DOWN Not connected
Description
Interface status:
•
Administratively DOWN—The interface is administratively
down.
•
DOWN—The interface is administratively up but physically
down.
•
UP—The interface is both administratively and physically up.
Hardware address of the interface.
Description information for the interface.
Expected bandwidth for an S-channel interface or a VSI interface.
Default VLAN ID of the interface.
Link type of the interface.
Encapsulation type of the trunk port.
Last time the reset counters interface command was executed to
clear interface statistics.
Never indicates interface statistics have never been cleared since
startup.
Total number of packets and bytes that the S-channel interface
received.
Total number of packets and bytes that the S-channel interface
sent.
11
-- --