HPE 5920 Series Command Reference Manual page 13

interface-number:channel-id: Specifies an S-channel interface or S-channel aggregate interface.
The interface-number argument specifies the interface where the S-channel resides. The channel-id
argument specifies the ID of the S-channel.
interface-number:channel-id.vsi-local-id: Specifies a VSI interface or VSI aggregate interface. The
interface-number argument specifies the interface where the S-channel resides. The channel-id
argument specifies the ID of the S-channel. The vsi-local-id argument specifies the local ID of the
VSI.
brief: Displays brief information. If you do not specify this keyword, the command displays detailed
information.
down: Displays information about interfaces in DOWN state and the causes. If you do not specify
this keyword, the command displays information about interfaces in all states.
description: Displays a complete interface description in brief information when you configure an
interface description string longer than 27 characters. If you do not specify this keyword, the
command displays only the first 27 characters in brief information.
Usage guidelines
If you do not specify the s-channel keyword, the command displays information about all interfaces.
If you specify the s-channel keyword but do not specify an S-channel interface or VSI interface, the
command displays information about all created S-channel interfaces and VSI interfaces.
Examples
# Display detailed information about S-Channel 1/0/1:10.
<Sysname> display interface s-channel 1/0/1:10
S-Channel1/0/1:10
Current state: UP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e
Description: S-Channel1/0/1:10 Interface
Bandwidth: 1000000kbps
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1
Port link-type: trunk
VLAN Passing:
VLAN permitted: 1(default vlan), 2
Trunk port encapsulation: IEEE 802.1q
Last clearing of counters: Never
Input (total):
Output (total):
# Display brief information about S-Channel 1/0/1:10.
<Sysname> display interface s-channel 1/0/1:10 brief
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
SCH1/0/1:10
# Display detailed information about S-Channel 1/0/1:10.1.
<Sysname> display interface s-channel 1/0/1:10.1
S-Channel1/0/1:10.1
1(default vlan), 2
6 packets, 384 bytes
18 packets, 1152 bytes
Link Speed Duplex Type PVID Description
UP 10G(a) F(a) T 1
10