Table of Contents
Advertisement
MK-5000G
Diamond Blade installation
(A)
Unlock Cutting Head.
(D)
Install the Diamond Blade onto
the Blade Shaft.
(G)
Rotate Blade Wrench clockwise
to tighten.
(B)
Raise the Cutting Head by
turning the Depth Control Wheel
clockwise.
(E)
Verify the Blade is seated on
the Blade Shaft and direction of
rotation is correct.
14
asseMBLY
(C)
Remove the Retaining Screw
and Outer Flange with the blade
wrench. Turn counter-clockwise
to loosen.
(F)
Install Retaining Screw and
Outer Flange.
Advertisement
Table of Contents
