Maintenance Safety - MK Diamond Products MK-5009G Owner's Operation Manual

MK-5000G
• Whenever necessary, replace nameplate, operation and safety decals when they become
difficult to read.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in
ON / OFF
a clean, dry location out of the reach of children.
• NEVER leave the machine unattended. Turn off electric motor when unattended.
CaUTiON must be observed while servicing the machine. Rotating parts can cause injury if contacted.
• NEVER operate the machine in an explosive atmosphere.
Before starting the machine, aLWaYs check that all guards are in position and correctly fitted. Check
the machine for loose bolts before starting.
Keep area around the machine clear of obstructions which could cause persons to fall onto moving parts.
aLWaYs ensure that the machine is on level ground before using.
Know how to stop the machine quickly in case of emergency. NeVer try to stop a moving blade with
your hands.
• NEVER disconnect any "emergency or safety devices". These devices are intended for operator
safety. Disconnection of these devices can cause severe injury, bodily harm or even death!
Disconnection of any of these devices will void all warranties.
• Unauthorized equipment modifications will void all warranties. Manufacturer does not assume re
sponsibility for any accident due to equipment modifications.
• NEVER use accessories or attachments, which are not recommended by MK Diamond for this
equipment. Damage to the equipment and/or injury to user may result.
WarNiNG
DO NOT use woodcutting, or carbide blades on this machine! Use ONLY Diamond blades on ma-
chine. Use machine only to cut tile and masonry products. DO NOT use machine to cut wood or
wood products.

MaiNTeNaNCe saFeTY

• NEVER lubricate components or attempt service on a running machine.
• Keep the machinery in proper running condition.
• Fix damage to the machine immediately and always replace broken parts, or missing decals.
8
saFeTY