Control Module; Power Module; Battery Module - MSA G1 Operating Manual

4.6

Control Module

(1) Check the displays for cracks and other visible damage.
(2) Ensure the buttons are not damaged or missing.
(3) Ensure the hose assembly is securely attached to the control module.
(4) Ensure the needle and gauge face on the gauge are clearly visible and that the gauge stem is
not bent.
4.7

Power Module

(1) Ensure that the power module and battery module are securely attached to the backplate.
(2) Inspect the piezo emitters on both sides of the power module.
The emitter covers should not obstructed by dirt or debris.

4.8

Battery Module

(1) Unlock the battery module with the battery removal tool.
Push the removal tool into the slot in the battery module and click

into place.
Pull the removal tool and the battery module out of the power

module.
(2) Remove the battery module from the power module.
(3) Check the battery module for visible damage, ensure that the
connection seal is in place and undamaged.
(4) Reinsert the battery module and turn off the PASS device.
G1
Visual Inspections
24
US