Removing The E-Module; Installing The E-Module - MSA G1 Manual

Maintenance and Care

2.15 Removing the E-Module

(1) Remove the regulator. (See
(2) Remove the valve assembly. (See
(3) Remove the regulator buttons. (See

2.16 Installing the E-Module

US
20
Removing the Regulator Hose
Removing the Valve Assembly
Removing the Regulator Buttons
(4) Rotate the E-module away from the electrical connector
slot and remove from the Regulator Housing.
(1) Insert the e-module into the regulator housing.
NOTE: Ensure the electrical connector aligns with the
connector slot.
(2) Install the regulator buttons. (See
lator Buttons for instructions.)
(3) Install the valve assembly. (See
Assembly for instructions.)
(4) Install the regulator. (See
for instructions.)
G1
for instructions.)
for instructions.)
for instructions.)
Installing the Regu-
Installing the Valve
Installing the Regulator Hose