Configure the Agilent BootP Service
BootP Service starts automatically when your PC reboots. In order to add
an additional instrument or to change the configuration the service must
be stopped. After the changes have been applied, the service must be
restarted.
1 To stop the BootP service go to Start > Settings >Control Panel >
Figure 61
2 Right click Agilent BootP Service.
3 Select Stop.
4 Close the Services and Administrative Tools windows.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
LAN Communication, Installation, Connection and Configuration
System and Security and select Administrative Tools > Services. The
Services window appears.
Services window
Using the Agilent BootP Service
7
125