Thrower Can Cause Serious Damage And Personal Injury. Do Not Use Your Hands To Unclog The - Power smart DB5006 User Manual

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS HARDWARE CONTENTS CARE AND MAINTENANCE PACKAGE CONTENTS TABLE OF CONTENTS
SAFETY INFORMATION SAFETY INFORMATION SAFETY INFORMATION
Note: Before using this machine, make sure that the power source you will use complies with the
MOVING THE MACHINE AND PLOWING THE SNOW
7. Locate two screws (AA). Insert the first screw (AA) 1. Align the slot on the main pole (G) with the track on 4. Insert the M5(CC) nut into the slot inside the Handle
Please read and understand this entire manual before attempting to assemble, operate or install the Body position - Maintain proper footing and balance at all times. Place heels firmly on the ground
PRODUCT LABELS
WARNING WARNING
Safety Information ........................................................................................................................... 5
specifications detailed in this manual. Before inserting the plug into the socket, verify that the snow
AA
the main handle (B).
Support（K）, making sure the nut is fully inserted. into the hole in the handle support (K) and tighten it
product. and tightly grasp the handle bar. Watch for uneven surfaces and do not overreach. In case you fall
WARNING - Read, understand and follow all safety labels and markings on the unit.
Make sure to turn off the switch and disconnect the extension cord before performing any Damaged electrical cords present risk of fire, electric shock, and serious bodily injury.
thrower's auger and scraper are firmly attached with screws. Perform a test run to ensure that the
with the screwdriver (BB). Insert the second screw
or collide with the snow thrower, inspect the unit for damage. When stepping backwards, be
Package Contents ........................................................................................................................... 3
maintenance task on your snow thrower.
Before operating the snow thrower, carefully examine the electrical cord. If the cord is damaged, do
rotor turns freely.
WARNING
Work Area
(AA) into the other hole and tighten. Insert the
careful to avoid obstacles beneath your feet or behind you to avoid falling.
not use the snow thrower. Replace or repair the damaged cord immediately. If you need assistance,
Foreign objects, such as rocks, broken glass, nails, wire, or string, can be picked up and
Keep work area clean and well-lit. Cluttered, dark areas invite accidents.
Run the snow thrower for a few minutes to melt away any snow on the snow thrower. Turn the
Snow thrower Use and Care
washer (EE) and the screw (DD) into the auger
SECURING THE EXTENSION CORD Hardware Contents ......................................................................................................................... 4
contact our customer service department at 1-800-791-9458.
thrown by the snow thrower, causing serious personal injury.
Do not operate snow thrower in an explosive atmosphere, such as in the presence of flammable
snow thrower's power off.
Know your snow thrower - Familiarize yourself with the main parts of your snow thrower.
housing and tighten the screw.
1. For safe and efficient use of your snow thrower, use only a UL-rated extension cord
Remove all foreign objects from the area to be plowed before operating the snow thrower. liquids, gases, or dust. Electrical appliances create sparks that may ignite the dust or fumes.
Disconnect the extension cord from the snow thrower. Read the operator's manual carefully. Learn your snow thrower's applications and limitations as
Preparation ..................................................................................................................................... 7
recommended for outdoor use. Refer to the Extension Cord Chart below.
Hardware Used
Keep children, pets, and bystanders away from work area. Be aware that the normal noise of the
POWERING ON AND OFF
well as the specific potential hazards related to this machine. Do not use this machine for any
Examine the extension cord thoroughly for signs of wear or damage. Replace it if it is worn or
Keep the area of operation free of foreign objects that can become thrown by the rotor blades.
machine when turned on may make it difficult for you to hear approaching people.
purpose other than the one for which it was designed. Otherwise, it may cause mechanical
damaged.
Assembly Instructions ..................................................................................................................... 8
Hardware Used
Perform a thorough inspection of the area since some objects may be hidden from view by
AA
ST4.8 x 20 Screw
WARNING
Electrical Safety 1. To power on, first press the switch button (C) on the
defaults, serious damage or personal injury.
Examine the snow thrower thoroughly for worn, loose bolts or damaged parts. For repairing or
surrounding snow. If the snow thrower hits an obstruction or picks up a foreign object during use,
Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings:
Electrical plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor
side of the hand grip and follow by squeezing the
Preliminary unit inspection - Thoroughly inspect the unit before use. Make sure all the parts are
replacing parts, contact customer service.
Operating Instructions .................................................................................................................... 11
cc
ST5 x 20 Screw
BB
stop the snow thrower, disconnect the extension cord, remove the obstruction, and inspect the unit Phillips Screwdriver
ST4.8 x 20
plugs with grounded appliances. Unmodified plugs and matching outlets will reduce risk of electric Do not allow any part of snow thrower to make contact with water while powered on. If the
trigger (D). Reverse operation cannot start the machine.
secure and installed correctly. If you notice any abnormalities, do not use the machine until it has
Store the extension cord with the snow thrower.
for damage. Repair or replace any damaged part before restarting and operating the unit.
Screw
shock. appliance becomes wet while turned off, wipe dry before starting.
been properly repaired. Always perform a test run the first time you use the snow thrower or after
Care and Maintenance .................................................................................................................. 14
Store the unit in a locked and dry or high and dry place to prevent unauthorized use/damage and
DD
M5 x 12 Screw
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and
Use only a UL-rated extension cord for outdoor, all-weather use. Do not use an extension cord
replacing parts to ensure that the unit is functioning properly.
keep out of the reach of children. Store the instruction manual along with unit for future use.
Qty. 2
Keep children, pets, and bystanders away from the area of operation. Be aware that the normal
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
more than 150 feet (46 meters) long.
Preliminary area inspection - Clear the area to be plowed before each use. Remove all objects
EE Warranty ....................................................................................................................................... 14
Ф5 x Ф12 x 1 Washer
noise of the machine when turned on may make it difficult for you to hear approaching people.
Do not abuse the cord. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
Don't touch the appliance or its plug with wet hands or while standing in water. Wearing rubber
such as rocks, broken glass, nails, wire, or string, which can be thrown by or become entangled in
entangled cords increase the risk of electric shock. Never carry the snow thrower by its cord or
boots offers some protection.
the snow thrower. Keep the area of operation clear of other people and pets.
WARRANTY
5. Pull the main cover connector out of the main cover 8. Loosen the knob (N) of the auxiliary handle (H). 2. Turn around the main handle and insert the main pole
Note wind direction. If possible, move in the same direction as the wind so that the snow is not
yank the cord to disconnect it from the electrical outlet.
Excessive force - The snow thrower was designed to respond at a certain rate for various snow
EXTENTION CORD CHART
(L). Push to snap together the connector on the handle Move the auxiliary handle (H) to a position that is
thrown against the wind (and thus back into your face and back onto the path). (G) into the main handle (B), making sure that the tab
Replace or properly repair damaged cords. If cord is damaged in any manner while plugged in, pull
TWO YEAR WARRANTY
conditions for optimum safety and performance. Do not force it; keep pressure constant.
Cord length is: Up to 100 ft. (30 m)
support (K) to the main cover connector; only one comfortable to you and tighten the knob (N).
on the main handle (B) is inserted into the hole on the
the extension cord from the wall receptacle.
Malfunctioning switch - Do not use the snow thrower if the switch does not turn it on and off. Any
Wire gauge is:
position is possible, and they should fit together
Contact with water while operating the snow thrower can result in electric shock and serious bodily main pole (G).
While moving the snow thrower, do not drag the power cable violently or roughly. The snow thrower
electrical appliance that cannot be controlled by the switch is not safe to use and must be repaired.
For two years from date of retail purchase within U.S.A., the manufacturer will, at its option, repair or
without forcing.
injury. Do not use the snow thrower in damp or wet locations or expose to rain. Do not handle the
should move within the range that the cable can reach.
Hitting an object - If the snow thrower accidentally strikes an object, stop the snow thrower; inspect
replace, for the original purchaser, free of charge, any part or parts found to be defective in material
2. To prevent the extension cord from disconnecting
2. To power off, release your grip on the trigger (D). plug or the appliance with wet hands or while standing in water.
for damage; repair or replace any damaged part before restarting and operating the snow thrower.
or workmanship. This warranty covers units which have been operated and maintained in accordance
during use, tie the female end of the extension cord
Extension Cord - WARNING - Only use a UL-rated extension cord for OUTDOOR, all-weather use
Do not push the snow thrower with excessive force. You should push the machine gently and Discharge chute safety - Never direct the snow discharge chute at the operator, at bystanders, at
with the owner's instructions furnished with the unit, and which have not been subject to misuse,
into a loose knot on the cord lock (E) before connecting
(usually orange color). To prevent the extension cord from disconnecting during operation, tie it
vehicles or at windows. Thrown snow and foreign objects accidentally picked up by the snow evenly in accordance with the unit's throw rate.
abuse, commercial use, neglect, accident improper maintenance or alteration.
to the male plug in the socket of the snow thrower.
around the top right side of the middle frame before connecting it to the snow thrower as shown in

thrower can cause serious damage and personal injury. Do not use your hands to unclog the

Figure 2 on page 11.
PRODUCT SPECIFICATIONS
discharge chute. Stop the motor before removing debris.
Do not apply additional man-made load to the engine since this may cause engine damage.
Personal use: THE FOREGOING PARAGRAPHS CONSTITUTE THE MANUFACTURER'S ENTIRE
Turn off the power switch and disconnect the power cable before inspecting, servicing, repairing, or
Abnormal operation - If you notice the snow thrower running in an unstable state or hear abnormal
WARRANTY WITH RESPECT TO ANY PRODUCT PURCHASED AND USED FOR PERSONAL
cleaning the snow thrower. Any such operation should be performed after revolving parts inside the
sounds from the engine, stop the machine, disconnect the power immediately, and contact your
FAMILY, HOUSEHOLD/RESIDENTIAL PURPOSES, AS DISTINGUISHED FROM COMMERCIAL
Some parts of the snow thrower may freeze under extreme temperature conditions. Do not attempt
snow thrower stop completely.
original distributor.
USAGE.
to operate the snow thrower with frozen parts. If the parts freeze while the snow thrower is in use,
Do not move or transport the snow thrower when the plug is connected to the power socket and the
Noise control - When using the snow thrower, you must respect local laws and regulations
stop the snow thrower, unplug the extension cord, and inspect for frozen parts. Free all parts
switch is turned on.
regarding noise control and environmental protection. To avoid noise disturbance, you should
before restarting or operating the snow thrower. Never force controls that have frozen.
Commercial use: ALL APPLICATIONS OTHER THAN PERSONAL USE AS OUTLINED ABOVE, ARE
Personal Safety
carefully decide upon an appropriate operation time and consider the surrounding conditions.
CAUTION
CONSIDERED COMMERCIAL USAGE.
Stay alert - Watch what you are doing and use common sense when operating the snow thrower.
When work is completed - Disconnect the snow thrower from the power source when not in use,
Plow width and depth: Approx. 30 cm x 10 cm (12 in. x 4 in.)
Inspect wiring, which, if damaged during shipping, may cause serious bodily injury during
Working on pebbles, gravel, or unpaved surfaces - To avoid throwing loose surface material along
3. Turn the handle fastener (F) clockwise to secure the 6. Line up the grooves in the handle support (K) with the 9. Loosen the joint fixing knob (I) on the main handle (B).
Do not use the machine when tired, ill, or under the influence of drugs, alcohol, or medication. A
when changing accessories, and before performing any maintenance.
equipment use. If any damage is seen or suspected, do not assemble. Instead, contact our
with the snow, push down on the handle to raise the scraper at the base of the unit above the
How to Obtain Service: If you need service, call our customer service department at 1-800-791-9458.
grooves in the main cover (L) and slide together until Set the pole to a position that is comfortable to you by connection between the main handle (B) and main
moment of inattention may result in serious personal injury.
Store safely - Store snow thrower indoors in a dry area between uses. Keep in a locked area
customer service department at 1-800-791-9458.
pebbles or gravel.
sliding the main handle (B) to the desired height. interlocked.
pole (G).
3. Note that the snow thrower has a polarized male plug Wear proper clothing - Wearing rubber boots offers additional protection from electric shock. Do not
where children and unauthorized users cannot gain access. Do not store the machine while it is
Handle with care during assembly so that electrical wiring does not become damaged.
Other Warranties: All other warranties, express or implied, including any implied warranty of
Tighten the knob (I).
wear loose clothing or jewelry that may become caught in the machine. Wear protective headgear
(A), with one prong in the socket slightly longer and
still connected to the power source. It may cause damage and injury.
merchantability is limited in its duration to that set forth in this express limited warranty. The
to keep hair away from revolving parts of the machine. Safety glasses offer better protection than
wider than the other. The extension cord female end
Maintain for safety and longevity - Check for misalignment or binding of moving parts, breakage of
provisions as set forth in this warranty provide the sole and exclusive remedy of the manufacturer's
everyday eyeglasses.
parts, and any other conditions that may affect the unit's operation. If damaged, repair or replace should be likewise polarized, so that the extension
obligations arising from the sale of its products. The manufacturer will not be liable for incidental or
Moving parts present risks - Keep your face, hair, clothing, hands and feet away from moving parts.
PREPARATION
the damaged part before use. Use only those replacement parts made for your model. When
cord fits snugly into the socket.
PART DESCRIPTION
consequential loss or damage. Some states do not allow exclusions of incidential or consequential
All guards and safety attachments must be installed properly before using the unit. Shut off and
replacing any parts, you must strictly observe the instructions and procedures described in this
Polarized plug (preassembled)
ATTACH YOUR RECEIPT HERE A
damages, so the above exclusions may not apply in all states. This warranty gives you specific legal
disconnect cord before touching any parts other than the handles and switch.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
manual. Special care should be paid to any rubber parts, since these parts may increase the
Main handle
B
rights in your state, which vary from state to state.
Surfaces - This snow thrower is intended for use on paved surfaces. Do not use on gravel, stone,
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
engine load and decrease its mechanical power if damaged.
Serial Number
C Switch button (preassembled)
or other unpaved surfaces unless the snow thrower is adjusted for such surfaces according to the
the product.
Trigger (preassembled)
instructions given in the operator's manual. D
Avoid accidental starting - Make sure the switch is in the off position before plugging in the unit. Do
Cord lock (preassembled)
E
Estimated Assembly Time: 5 minutes
Questions, problems, missing parts? Before returning to your retailer, call our customer
not carry the snow thrower with your finger on the switch.
Handle fastener
F
service department at 1-800-791-9458.
Tools required for assembly (included): Phillips screwdriver
Main pole
G
BB
9 AMP ELECTRIC SNOW THROWER
H
Phillips
Screwdriver
Qty. 1
100-150 ft.(30 m-46 m)
16
J
K
SPECIFICATIONS
Voltage: 120 V, 60 Hz
Input power: 9 Amp
Rotation speed: 2,100 RPM
Max. spraying distance: 3 m (10 ft.)
Net weight: 5.7 kg (12.5 lbs.)
M
QUANTITY
1
1
Purchase Date
1
1
1
1
1
7 4 1
CC
C
B
M5
F
Nut
M5 x 12
Qty. 1
Screw
x 2
1
G
Qty. 1
x 1
x 1
x 1
C
x 1
8 5 2
14
I
2
L
3 6 9
3
PART DESCRIPTION
Auxiliary handle
H
Joint fixing knob
I
J Telescopic pole
Handle support
K
G
Main cover (preassembled)
L
Auger (preassembled)
M
Auxiliary handle knob
N
1 5 7 4 6 2 3
10 12 13 14 11 9 8
MODEL #DB5006
DD EE
EE
E
DD
Ф5 × Ф12 × 1
Washer
D
Qty. 1
CC
G
B
A
N
D
B
N
L
E
tap
H
G
hole
B
A
F
L
K
I
Printed in China
AA
K
C
QUANTITY
1
1
1
1
B
1
1
1