Radiodetection RD7000+ User Manual page 7

Hide thumbs Also See for RD7000+:
Table of Contents

Advertisement

Signal clamps
transmitter signal clamp can be connected to the accessory socket of the transmitter
and the output signal can be applied. This is particularly useful with live cables as it
removes the need to disable the power and break into the line.
To locate or indentify individual lines a locator signal clamp can be connected to the
accessory socket of the locator and can be clamped around individual cables or pipes
that are bunched together.
Stethoscopes
line due to inaccessibility. In these situations a stethoscope antenna should be used to
locate or identify individual target lines.
Locating sondes
Sondes are battery powered transmitters that are useful for tracking non-metallic pipes
crawler.
accurately using an accessory A-Frame. The Tx-3 and Tx-10 transmitters provide a fault
damage to cable sheaths.
Using accessories
and transmitters. These accessories can be used on a wide range of applications for
or go to www.radiodetection.com.
14
Centros Manager
latest software you must register for extended warranty (see page 5 for details). Once
registered you will receive an email when new versions of software are available and you
locator.
Installing Centros Manager
Note: Before download you are advised to view or download the Centros Manager
operation Manual by going to www.radiodetection.com/centrosmanager.
Note: When you install Centros Manager onto a PC, the following message may
be displayed: "You need to log in as Administrator". If this message is displayed,
the installation of the program will not complete. You will need to log on as an
Administrator or ask a user with Administration Rights to install the program on your
behalf. Having successfully installed Centros Manager, the Administrator will need to
carry out the instructions in Section 7.1 of the Centros Manager Operation Manual if
they wish users without Administrator Rights to use Centros Manager.
1.
Go to: www.radiodetection.com/centrosmanager.
2.
Click on the link to download Centros Manager and a File Download Window will
Run:
Save:
3.
Note: Once Centros Manager is open, click on Help to open the Centros Manager
Operation Manual.
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RD7000+ and is the answer not in the manual?

This manual is also suitable for:

Tx-1Tx-3Tx-10

Table of Contents