™ Online manuals, which are available for download from www.radiodetection.com. The online User Manual library also contains links to the RD Manager Online manuals. Certificates of conformity for the RD8200SG locators and Tx transmitter ranges can be found at www.radiodetection.com.
Page 3
RD8200SG’s locating circuitry, and supplies a Radiodetection Calibration Certificate when a positive test result is obtained. WARNING! Batteries can get hot after prolonged use at full output power.
Tx-5 and Tx-10 transmitters Transmitter features 15. Clamp icon: Indicates when a Keypad. signal clamp or other accessory is LCD. connected. Removable accessory tray. 16. DC Power connected indicator. D-cell battery tray. 17. Induction mode indicator. Optional Lithium-Ion battery pack. 18.
Keypad actions and shortcuts 2. Lift the battery pack. Before you begin 3. Lift the accessory flap and press the retaining flap inwards. Switch the locator or transmitter on by pressing the key. Before you start using the Once powered up, the keys function as follows: RD8200SG, make sure you have the following: Locator keys...
You can re-charge your batteries using 4. Line up the battery pack the Radiodetection mains or automotive and press into position 3. Scan for a new device to add to the list chargers.
Pairing Locator Bluetooth to Android Device Bluetooth error codes Please refer to the 'To navigate menus' 6. When asked for a passkey, enter 1234. If an error occurs when attempting to perform any Bluetooth command using the locator section on p.21 for assistance. to the transmitter or the locator to a PC or paired device, the LCD will display a code to help you resolve the problem on the locator.
Radiodetection. next to GPS and select 4. Check GPS is ON: SMLOG > PROT > ASCII > GPS+ > YES. Radiodetection. Then Instructions for PointMan: 5. Check RTK is ON: GPS > RTK > ON. click on the right drop 1.
Page 10
Start a survey NTRIP client setup: 4. Click ‘Test’ to ensure 5. The ‘Fix type’ field will 7. Once RTK float/fix has that you have entered display values such as been achieved you can 1. Click ‘Edit’ in the and obtaining the details correctly –...
Send data from PointMan to email System Menu 1. Once you have 3. Select the survey and 5. Type your email address The RD8200SG locator and transmitter BT, pair with external device, select BT completed the survey, select OK on the ‘Send’ and send the files.
Page 12
Transmitter menu options Locating with Passive The transmitter will then apply a discrete signal to the line, which you can trace Frequencies • VOL: Adjust the speaker volume from using the locator. This method provides the 0 (mute) to 3 (loudest). best signal on an individual line and enables Passive frequency detection takes advantage •...
Page 13
Radiodetection in the United States and / or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Radiodetection is under license. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Need help?
Do you have a question about the RD8200 SG and is the answer not in the manual?
Questions and answers