Before You Begin; System Setup; Using The Menu; Transmitter Menu Options - Radiodetection RD7000+ User Manual

Before you begin

IMPORTANT! Please read this section before you attempt to operate the
RD7000+!

System setup

It is important that you set up the system according to your personal preferences and

Using the menu

icons will temporarily disappear and the menu options will appear in the bottom left-hand
as left and right arrows. When browsing the transmitter menu the
as left and right arrows. The right arrow enters a submenu and the left arrow accepts the
selection and returns to the previous menu.

Locator menu options

VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
Alert .
ANT: Enable or disable any antenna mode with the exception of Peak.
LANG: Select your preferred system language.
CAL: Displays the date of the last factory calibration.
UNIT: Depth readings in metric or imperial units.
and keys act
and keys act
10
To navigate the locator menu:
1. First power up the locator.
2. key to enter the menu.
3. Use the or arrows to scroll through the menu options.
4. Press the
5. Use the or
6. Press the key to accept your selection and return to the main menu.
7.
instructions 3 to 6 above or alternatively momentarily press the
menu and return to the main operating screen.

Transmitter menu options

VOL: Adjust the speaker volume from 0 (mute) to 3 (loudest).
Bluetooth
®
OPT F: Enable or disable SideStepauto .
LANG: Select the transmitter system language.
To navigate the transmitter menu:
1. First power up the transmitter.
2. key to enter the menu.
3. Use the or arrows to scroll through the menu options.
4. Press the
5. Use the or
6. Press the key to accept your selection and return to the main menu.
7.
instructions 3 to 6 above or alternatively momentarily press the
menu and return to the main operating screen.
key to exit the
connections (Tx-3B and Tx-10B only).
key to exit the
11