Play Mode - Mooer Ocean Machine Owner's Manual

Ocean Machine will boot directly to Play mode by default when powered on. In this mode the
ocean machine will operate like a traditional stompbox. All basic effect parameters are depicted
directly by the values of the physical control knobs.
Reverb/DelayB/DelayA
Depressing any of these footswitches once will turn on or turn off it's respective effect.
Holding down any of these footswitches while it's respective effect is turned on will put
the effect into a state of infinite feedback until the footswitch is released.
TAP Tempo
Simultaneously depress the Reverb and DelayB footswitches to access tap tempo control.
You will then have a few seconds to tap your desired tempo.
Reverb footswitch = master tap tempo
Delay B footswitch = Delay B tempo
Delay A footswitch = Delay A tempo
Auto sub-division values can be set for each delay separately in the menu screen.
Effect Parameters
All of the basic effect parameters can be adjusted directly using their respective control knobs.
More effect parameters, tempo sub-divisions, ping pong, effects chain, etc. can all be edited
and adjusted within the menu screen.
Master Mix
Rotate the Menu control when nothing is selected within the menu screen to adjust the master
output effect mix of the ocean machine.
MIX

Play Mode

05