Mooer Micro Series Owner's Manual

@Wah
Digital Auto Wah Prdal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC,
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
*Direct sunlight *Heat sources
*Magnetic fields *Extreme temperature or humidity
*Excessively dusty or dirty location *High humidity or moisture
*Strong vibration or shock
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Main Features
5 different Wah filter modes
Two methods of operation : Auto (time based) and Touch (dynamic response)
Versatile controls
Full metal case
,center





Truebypass switching
9V power supply
Pedal layout
DC IN
AUTO
5 TOUCH
4
SPEED GAIN /
RANGE
HP
3
MODE
9
@Wah
7. DC in power jack: Input for power supply
power supply.
8. Input jack : 1/4" audio jack for connecting to the input device or
instrument.
9. Output jack : 1/4" audio jack, effect output for connection to amp or
other devices.
Modes：5 digital auto filters with 2 methods of operation.
Input：1/4" mono audio jack.（Impedance: 470k Ohms）
Output：1/4" mono audio jack（Impedance: 100 Ohms）
Power requirements: AC adapter 9V DC
recommend to use Mooer Micro Power.
Current Draw:
120mA
Dimensions：93.5mm(D) x 42mm(W) x 52mm(H)
Weight：140g
Accessories：Owner's Manual
*Notes：Any specification's update will not be amended in this manual.
7
1.True bypass footswitch: Engages and
disengages the effect.
2.On/Off Led: Shows the on/off status of
6
the pedal. When the Led is lit the effect
is engaged.
3.MODE control: Selects the filter mode
and simultaneously adjusts the MIX and
ATTACK of the filter. The 5 filter modes
8
are listed below:
LP (Low pass)
BP (bandpass)
HP (high pass)
SP (Standard)
2
TALK (vocals)
4. RANGE:Adjusts the tonality of the filter
5. Operation method switch: 'AUTO' is a
time based filter. 'Touch' responds to
the dynamics of the instrument.
1
6. SPEED / GAIN: Adjusts the rate
of the 'AUTO' wah or the input response
of the 'TOUCH' wah.
, use a 9V DC regulated
,center negative. Highly
Part No:620010599