Mooer EchoVerb Micro Owner's Manual

EchoVerb
Digital Delay& Reverb Pedal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V DC,
negative. Please do not use an AC adapter which supplies more than 9V DC.
Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power and all other equipment before connecting or
disconnecting. This will help prevent malfunction and damage to any of the devices.
Make sure to unplug all connection cables and power cords before moving this unit.
To avoid deformation, discoloration, or other serious damage,
do not expose this unit to the following conditions:
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Clean only with a soft, dry cloth.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock or excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
Main Features
High Quality Reverb and Digital Delay in one micro pedal
Delay controls: TIME, FEEDBACK and LEVEL
Reverb controls: TONE, DECAY and MIX
Tap tempo functionality
Small and compact size
True bypass
,center





Heat sources
Extreme temperature or humidity
High humidity or moisture
Pedal layout
DC IN
DELAY
5
REVERB
4
TIME TONE FB DECAY
LEVEL MIX
3
9
7. DC in power jack: Input for power supply, use a 9V DC regulated power supply
, center pin negative.
8. Input jack :
1/4" audio jack for connecting to the input device or instrument.
9. Output jack :
1/4" audio jack, effect output for connection to amp or other
devices.
Modes:Delay and reverb effects with tap tempo functionality.
Input:1/4" mono audio jack.(Impedance: 470k Ohms)
Output:1/4" mono audio jack(mpedance: 100 Ohms)
Power requirements:AC adapter 9V DC
Highly recommend to use Mooer Micro Power.
Current Draw:160mA
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)
Weight:146g
Accessories:Owner's Manual
*Notes：Any specification's update will not be amended in this manual.
7 1.True bypass footswitch: Engages and
disengages the effect. Depressing the
footswitch for more than 2 seconds will
6
engage Tap Tempo functionality and the
LED will flash. Tap the footswitch two or
more times to synchronize the delay to
your desired tempo. The pedal will revert
back to normal operation after 5 seconds.
8
2.LED:Displays the on/off status of the
pedal.Provides instant access to Tap
Tempo. Tap the LED 2 or more times to
synchronize the delay to your desired
tempo.
2
3.LEVEL/MIX control:Adjusts volume of
delay and wet/dry mix of reverb.
4.TIME/TONE: Adjusts Delay time and
Reverb tonality.
5.Controls switch:Depicts which effect
1
the controls are adjusting. Switch up to
adjust Delay parameters switch down to
adjust reverb parameters.
6.FB/DECAY:Adjusts Delay feedback
and Reverb decay.
,center negative.
Part No:620010602