Table of Contents
Advertisement
Press lCLEAR[twice to return to the last selected display mode.
3.5.6 Simulator Mode
The
includes a simulator mode which can
NAV 398
show simulated readouts on the various screens. There
are dynamic simulated screens for both loran and GPS
and can be used to demonstate navigation to waypoints
and following route plans.
To turn the simulator ON, be in Plot mode and press thelE\key . Press
the ~SIMULATOR~
press
ON, "SIM" flashes on the various display screens.
Display Mode Operations
3.5.7
While you are on any of the POS, NAV, CDI, or PLOT display modes you
can perform the following operations:
Event....Press thdm[ key.
Save an
l
The Event message will appear and show the
saved memory #.
GO TO a Destination...Press
l
Enter the waypoint # using three digits and
then press(ENTET\1.
3.5.7.1 Saving Events
You can save your present position for future use as a waypoint when you
are in any of display modes. The
the next available waypoint memory just like a normal waypoint.
Just press theI- key. A
m e s s a g e p r o m p t a p p e a r s t o p e r m i t y o u t o
select any other memory # location. If no keys are pressed in live seconds,
the message will show the Event memory number and then disappear.
If during the 5 second period you type in a different memory number and
press thdmlkey, the Event will be saved into the memory that you have
designated. If the memory number you typed was the same number as your
current destination, upon pressing the(ENTERl[key
showing
and really don't want to overwrite your destination point, just press the
OPERATION 3-16
to ON. Conversely, to turn OFF the simulator,
a second time. When the simulator mode is
the wi key.
data will be stored sequentially into
EVENT
flashing. If you typed the memory number by mistake
PLOT MENU
TRACK MENU +
the screen alerts you by
Hide quick links:
Advertisement
Table of Contents
