Setting Up Your Radar - Raymarine C140w User Reference Handbook

2. Using the trackpad, highlight the Alarm Setup menu item and
press the trackpad right to select it.
3. Using the trackpad, highlight the Radar Alarms Setup menu item
and press the trackpad right to select it.
Using radar

9.13 Setting up your radar

The set up for your radar can be changed from the standard
configuration to suit your particular needs.
Although you will probably only do this when you first use the radar,
you may decide to make subsequent adjustments once you become
more familiar with the system. Any settings that you change are
retained and become the default settings, even when you power off
your multifunction display.
Radar setup menu options
The Radar Setup menu enables you to configure the performance
and behaviour of your radar scanner.
Function Description
Select Select the radar scanner that is
connected to your multifunction
Scanner
display. Only one radar scanner may
be connected at any one time.
Scanner Setup This menu item contains a sub-menu
that enables you to adjust the settings
for the following functions:
• Dual Range (Digital only) — when
set to ON, this allows you to view two
ranges simultaneously in separate
windows. Short range provides
a maximum range of 3 nautical
miles; long range provides standard
values. Long range cannot be set to
a value that is less than short range.
Options
None.
Dual Range
• ON
• OFF
Tune Adjust
• AUTO
• MANUAL
Sea Clutter Curve
129