using Electronic Bearing Lines (EBLs)
Reference
and range rings in the chart application.
The options are Magnetic/True North,
or Relative.
Timed
Controls the radar's timed transmission
Transmit
power-save mode.
Transmit
When ON, the scanner performs the
Period
number of scans specified and then
shuts down for the number of minutes
specified by the Standby Period.
Standby
Indicates the number of minutes that
Period
the system shuts down - the scanner
does not rotate and the display is in
standby mode.
Bearing
Enables you to make corrections for
Alignment
display azimuth error.
Radar
Advanced setup options.
Advanced
Setup
Using radar
• Relative
• On
• Off
• 10 SCANS
• 20 SCANS
• 30 SCANS
• 3 MINS
• 5 MINS
• 10 MINS
• 15 MINS
Refer to
Installation Guide
Refer to
Installation Guide
131